UI parity with the platform CLI: `fai reset` (v0.10.93) is now
reachable from Settings. The panel shows the reset blurb plus
two checkboxes mirroring the CLI flags (Keep modules / Keep
audit log + saved flows), then a destructive-styled "Reset hub
state" button. Click goes through a confirm dialog before
SystemActions.faiReset is invoked.
After the CLI returns, Studio bounces its gRPC channel against
the same endpoint (the daemon restarts on the same channel +
port, so no Settings change needed) and reloads every panel:
channel status, system AI, MCP clients, n8n endpoints, registry
token. Output (success or failure) is shown in a copyable error
box so any unexpected stderr lands somewhere the operator can
paste from.
Sits at the bottom of the dialog under "HUB MAINTENANCE",
separated from the everyday config so a destructive button
doesn't crowd the day-to-day controls.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The hub install path now reads `~/.fai/registry-token` as a
fallback when `FAI_REGISTRY_TOKEN` is unset (platform v0.10.92).
Studio now writes that file directly: a fresh operator pastes
the PAT into Settings → Registry credentials, hits Save, and
the next install attempt resolves the auth wall without any
shell or env-var setup.
The token never round-trips back into Studio after save —
status is shown only as "Configured (40 chars)" / "Not set"
with no display of the secret itself. The Clear action deletes
the file. On Unix the file is chmod-ed to 0600 (owner-only
read/write); Windows leaves the default user ACL in place.
Storage is strictly local: `~/.fai/registry-token`, never sent
to a remote service. The hint text under the field says so to
make the data flow explicit.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three concrete changes against operator feedback that the
Today carousel was visually jumping when arrowed and
genre-mixing platform-architecture education with store-
actionable highlights.
- Carousel size pinned. The hero's outer Container picks up
`BoxConstraints(minHeight: 240)` so a slide with one
paragraph and a slide with three render at the same
height. Prev/next no longer reflows the rest of the page.
- Today fallback stories trimmed and re-themed. The four
shipped slides drop to three:
- "Public sources" (DeepWiki / Semgrep one-click) — kept
- "Three text modules already in the store" — new,
points the operator at text.extract / text.summarize /
text.translate in the grid below
- "Try the extract → summarize flow" — new, points at
flows/extract-summarize.yaml
Architecture-education stories (sandbox model, hash-
chained audit, air-gap posture) are gone from this surface
— they belong on the Welcome page that
`docs/landing-page-design.md` lays out.
- DeepWiki + Semgrep added to the Settings → MCP-Clients
add-server suggestion-chip catalogue. Until now the chips
were nine stdio servers that need Node + npx; the two
HTTPS public sources only existed as one-click cards in
the Today hero. Operators who dismissed the hero had no
in-Settings path to find them. The new entries sit at the
top of the catalogue with an explicit "Public HTTPS — no
Node, no API key" descriptor and the same icons the Today
hero already uses.
- `docs/landing-page-design.md` (new). Captures the design
for a sidebar Welcome page that hosts the three-pillar
intro, the trust-posture deck, the getting-started
checklist, and an embedded-doc reader so operator-facing
documentation stays inside Studio (`flutter_markdown`
rendering of bundled `assets/docs/*.md`) instead of
clicking out to a browser. Three-phase implementation
plan: scaffolding, embedded docs, computed checklist.
Build is gated on operator alignment; this doc is the
alignment artefact.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Sweeping pass against six user reports collected this session.
1. "Capabilities ist nicht deutsch, Chain auch nicht."
The DE locale still leaked English vocabulary. Replaced
"Capabilities" → "Fähigkeiten" and "Chain" / "Hash-Chain"
→ "Kette" / "Hash-Kette" everywhere — store search hint,
recommended-source body, federated toast, doctor summary
chain row, modules panel summary, MCP / n8n hints, the
approvals history blurb. Wire-level identifiers
(`chain.reset`) stay as code.
2. "Bei Fehlern unten muss man die auch ins clipboard
kopieren können." New `FaiErrorBox` widget: selectable
monospace block with a small copy-to-clipboard icon
button that flips to a checkmark for two seconds after
click. Applied to the Doctor update banner output and
the Settings channel toast — the two places long
stderr / stdout lands.
3. "Öffnen bei Log kann es nicht öffnen. Audit-DB auch
nicht. PID auch nicht."
Cause: `SystemActions.openInOs` shells out to `open` /
`xdg-open` on file paths the OS has no default handler
for (SQLite DB, PID file, log without an .ext that
binds). New `revealInOs` uses `open -R` on macOS,
`explorer /select,` on Windows, and the parent
directory via `xdg-open` on Linux. Doctor's path rows
carry an `isDirectory` flag that routes through the new
`openOrReveal` so files reveal in Finder / Explorer
instead of failing silently.
4. "Oben im Store könnte man diesen Redaktionshinweis auch
so bauen, dass man mit pfeil nach rechts links auch
weitere anzeigen kann."
The Today-Hero became a carousel. Curated fallback
list grew from one entry to four (public sources, the
sandbox-by-default permission story, the hash-chained
audit story, the air-gap-ready single-binary pitch).
Hero gets prev / next chevrons plus a dot indicator
when the current snapshot has more than one slide.
Operator-accepted stories stay single — the carousel
collapses when there's only one to show.
5. "Ich fände es schöner wenn rechts und links im Store
die Abstände konsistent sind, das Reload-Symbol rechts
ist zu weit rechts und Store links auch nicht bündig."
AppBar now has `titleSpacing: FaiSpace.xl` so the
title's left edge sits flush with the body's left
padding (24 dp), and the trailing `SizedBox` after the
reload icon shrunk so the icon's outer edge meets the
right edge of the rightmost grid card.
6. "Oben der Titel zeigt fai_studio an, das sollte F∆I
Studio sein." The OS window title was the
pubspec-derived "fai_studio". Macos/Linux/Windows
runners now hard-code "F∆I Studio" (with the U+2206
triangle escape so the C++ source stays ASCII). macOS
bundle name and display name lifted out of the
PRODUCT_NAME variable for the same reason.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Mirror of the MCP-clients panel: Add / Remove / Refresh
with last-discovery health (workflow count or error_kind),
sister Add-dialog with name + base_url + optional
api_key_env + notes. HubService gains the four passthroughs
(`listN8nEndpoints`, `refreshN8nEndpoints`,
`addN8nEndpoint`, `removeN8nEndpoint`) and a
`N8nEndpointInfo` data class.
Settings dialog now hosts: hub endpoint, channels,
system AI, MCP clients, n8n endpoints — all behind the
existing 520×640 SingleChildScrollView so the layout
doesn't crowd.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The viral-bridge story now has a UI surface. Settings →
MCP Clients lists every configured server, shows last-
discovery health (green dot + tool count, red dot + error
kind), and offers Add / Remove / Refresh.
Add-server dialog: name (no dots), endpoint, optional
api_key_env, optional notes. On submit the hub persists +
re-runs discovery in one round-trip; the Store fills with
synthetic `mcp.<name>.<tool>` entries the operator can see
immediately.
StoreItem now carries `kind` and `provider`. Federated
entries route through a bridge — no install bundle to
download — and Studio's install button renders accordingly
(via the existing "Not installable" path; the Phase-2
follow-up adds an explicit "Configure bridge" call-to-action).
Settings dialog grew to 520×640 with a SingleChildScrollView
so the additional panels don't crowd. Channel pill, system-AI
panel, MCP-clients panel all coexist without a redesign.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
UI parity for operators who never touch a CLI, plus a Store
that reads more like an app store.
Settings dialog:
- Channel rows gain a popup menu: Connect / Make active /
Enable autostart / Disable autostart. "Connect" still
re-points Studio's wire; "Make active" actually writes
~/.fai/current-channel via `fai channel switch`.
- Inline output panel surfaces the spawned binary's stdout
on success or stderr on failure, so operators see what
happened without opening a terminal.
Store page rewrite:
- Big top search bar with a clear button. Live filter on
every keystroke.
- Horizontal category strip auto-populated from the index;
segmented status row (All / Published / Alpha / Planned),
Installed-only chip, result count.
- Grid of cards that reflows to fit the viewport — replaces
the previous single-column list. Each card shows
category-aware icon, version, status, tagline preview, and
a one-click Install (or Details for installed / planned).
- Per-module detail sheet renders the full bilingual
description with a DE/EN toggle, separate Required-
capabilities + Required-host-services sections, repo link,
Read-docs button. Install + Uninstall live at the bottom.
- StoreItem and HubService.searchStore now carry the German
tagline + description so the locale toggle has something
to switch to.
SystemActions extended with `faiChannelSwitch`,
`faiDaemonEnable`, `faiDaemonDisable` so Settings can spawn
the right CLI without each call site reimplementing the
`fai` resolution rules.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Replaces the read-only System AI block in Settings with a real
editor. Operator never has to touch ~/.fai/config.yaml again
to change provider, endpoint, model, API-key env-var, or
privacy mode.
UX choices that align with the zero-learning-curve rule:
* Provider dropdown lists Ollama / OpenAI / LM Studio / vLLM
/ Custom by friendly name. Each selection auto-fills the
endpoint and api_key_env defaults — but only when the
field is still empty or matches a different preset's
default, so manual overrides are never clobbered.
* Each provider has a one-line description rendered under
the dropdown ("Ollama → Local `ollama serve`. Models stay
on your machine. No API key needed.") and a model-hint
placeholder ("gemma3:4b · llama3.2:3b · qwen2.5-coder:7b")
that goes away when a model is typed.
* Privacy mode is a vertical radio group with each option's
description in place — no doc-lookup needed.
* "Test connection" sends an `ok`-ping and renders the
same error-kind → fix-hint mapping the audit drill-down
uses.
* "Save" persists + hot-reloads the hub. No daemon restart
required. UI status badge flips to "enabled · <privacy>"
immediately.
`fai_dart_sdk` 0.5.0 carries the underlying `updateSystemAi` /
`testSystemAi` RPCs.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two new operator affordances powered by `HubAdmin.AskAi`:
* **Audit drill-down → "Explain" button.** Tappable on every
failed event when System AI is configured; greyed out with
a "Configure in Settings" tooltip otherwise. Shows an
inline panel under the event fields with the LLM's plain-
language explanation, a "FIX" suggestion, the privacy-mode
badge (`redacted` / `full`), and round-trip latency. Errors
map to actionable fix hints (`env_missing` → "set $VAR in
your shell, then fai daemon restart"; `network` → "is your
provider running?"; etc.) — no raw HTTP errors surfaced.
* **Settings dialog → System AI panel.** Renders the live
HubAdmin.SystemAiStatus (provider, endpoint, model,
api_key_env name, privacy mode). When disabled, shows a
one-line explainer + pointer to docs/architecture/system-ai.md.
Read-only for now; editing the config still requires
~/.fai/config.yaml (Phase-1+ adds in-place editing).
Both surfaces follow the new zero-learning-curve UX rule:
the user never has to look up what the configurable means or
how to fix an error — every state self-explains in place.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Turns Studio from read-only dashboard into operator console.
Pieces:
* **New Store page** (sidebar destination #3): browses the
hub's bundled store-index with query + category + status
filters. Each card has an Install button that prompts for
the `.fai` bundle source (URL or local path), ships it to
HubAdmin.InstallModule, shows success / error in a progress
dialog, refreshes the list.
* **Audit drill-down**: every event row is now tappable;
opens a modal with all LoggedEvent fields including the
new `detail` JSON pretty-printed in a code block. KRITIS
forensic story: every audit row → full structured detail
in two clicks.
* **Approvals payload preview**: shipped already; now
pretty-prints JSON when the preview parses as such, plus
a clearer `PAYLOAD PREVIEW` label. Reviewer identity
defaults to `$USER@studio` instead of the hard-coded
`studio-mvp` so the audit trail records who acted.
* **Channel switcher in Settings dialog**: the dialog now
pulls HubAdmin.ChannelStatus and renders one row per
channel (local / dev / beta / production) with port,
running indicator, active marker. A "Connect" button
on a running channel sets Studio's endpoint to that
channel's port and reconnects in one click.
Cmd+1..6 keyboard shortcuts updated for the six destinations.
Widget test asserts every destination renders.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio is no longer hardcoded to localhost:50051. A gear icon
in the sidebar footer opens a small settings dialog where the
operator picks host / port / TLS-on-or-off. Saved values
persist via shared_preferences and Studio reconnects to the
new endpoint immediately.
- data/hub.dart: HubService.loadPersistedEndpoint() called once
before the first frame; reconnect() persists on every change.
- widgets/fai_settings_dialog.dart: typed form with port range
validation, live URL preview pill, error surfacing if the
reconnect fails.
- main.dart: gear icon at the sidebar bottom, replaces the
static "platform v0.10.42" footer.
shared_preferences added as dependency. flutter analyze clean,
flutter test 2/2, macOS debug build succeeds.
Bumps fai_studio 0.4.0 -> 0.5.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
