Review follow-ups on the auth-status work:
- Both daemon-start paths classified an auth-rejected hub as "daemon
dead" via healthy() and showed a start-failure dialog while the
shell banner above correctly blamed the token. They now share
daemonAnswers(): only an unreachable probe counts as down.
- An auth-rejected poll now re-reads ~/.chain/hub-auth-token and
reconnects when the file changed, so a token fixed outside Studio
(CLI, editor) heals the connection without a restart — previously
the client kept the stale in-memory token forever and the banner's
own advice could not work.
- An endpoint switch resets the failure streak, so a stale in-flight
probe can no longer let the unreachable banner blame the new
endpoint for the old one's misses.
- The auth-policy panel re-queries when the hub token is saved or
cleared in the panel above (reloadTick), instead of keeping a
stale admin-denied hint; it also renders the hub's new
reload_required flag as a pending-reload warning (DE+EN).
- today-pipeline.md still documented ~/.fai/today after the rename;
the FAB theme comment now states the both-themes intent.
flutter analyze clean; 71 tests green including four new ones.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The sustained-failure banner treated every failed health poll as
'can't reach the hub'. With token auth active, a wrong or rotated
token gets UNAUTHENTICATED from a perfectly reachable hub — the
old wording sent the operator to fix the endpoint. The shell now
uses the SDK's probe() and, on auth rejection, switches the banner
to 'rejected the sign-in — check the access token' (key-off icon,
DE+EN). Two widget tests pin the wording per failure kind and the
banner clearing once the probe turns serving.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Accessibility/responsive audit pass with two new permanent test
gates (test/a11y_test.dart: WCAG text contrast + labeled tap
targets on every page in both themes; test/responsive_test.dart:
no layout overflow at 800/960/1280/1920 px). Findings fixed:
- Light theme primary/tertiary sky-500 → sky-700: white text on
the lighter accent only reached 2.8:1 (welcome CTA, active
sidebar label); sky-700 clears WCAG AA at ~5.9:1. Dark theme
unchanged (already compliant). FABs now follow the same accent
instead of Material 3's washed-out tonal default.
- Audit page: filter chips collapse into a checkmark popup menu
below 900 px window width (app bar overflowed); the live-status
bar's left text is now Expanded with ellipsis so the row can
shrink, and the disconnected state's copyable error gets the
full remaining width.
- German strings now use formal address consistently (~20 strings
still used du-forms next to Sie-forms on welcome/setup), the
audit event-type chip "Step" is "Schritt", and the doctor
page's event count pluralises correctly in both languages.
flutter analyze clean, 64 tests green. Screenshot pass light+dark
via the guide-shots harness (verified parity, no overflows).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Settings → Security now shows the hub's effective auth policy via the
new read-only AuthStatus RPC: active token validator (static / jwt-rs256
with issuer, audience, JWKS source), anonymous-access warning, per-token
cards with scope grants, env-var presence and rate limits, plus a
localized admin-denied story for non-admin tokens. Live-reloads on
endpoint change.
Also fixes a batch of fai→chain rename leftovers this panel's
verification uncovered: hub_auth_token.dart and registry_token.dart
read/wrote ~/.fai/ while the hub reads ~/.chain/ (stored registry
tokens never reached the hub), today_story_loader + tools/today used
~/.fai/today, chain_log legacy ~/.fai/logs migration removed per the
no-legacy-recognisers decision, and UI strings still advertised the
retired .fai bundle extension.
Includes 5 widget tests for the panel, an integration-test screenshot
harness (auth_policy_shots_test.dart, guide-shots style), and DE+EN
l10n. flutter analyze clean, 58 tests green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Field test of the setup wizard surfaced three trust breaks in one run:
an unexplained macOS Documents permission prompt, a perceived crash,
and an error message whose copy button could not be reached.
Root causes and fixes:
- chain init failures were shown as a SnackBar, which lands BEHIND the
wizard's modal barrier: dimmed, clipped, copy unreachable — and the
click aimed at it hit the barrier, dismissing the whole wizard with
all answers (the perceived crash). Errors now open a modal dialog
ABOVE the wizard via showChainErrorDialog with a copyable detail
block, and the wizard is no longer barrier-dismissible.
- When the resolved chain binary is older than Studio and rejects
--plan-json, the wizard now explains the version skew in plain
language (binary path + update path) instead of leaking a raw clap
usage error. A missing binary gets its own localized story.
- Step 3 announces which chain binary the preview will execute; when
that binary physically lives (symlinks resolved) in a TCC-protected
folder, the wizard pre-explains the macOS folder prompt.
Supporting changes: FriendlyError passes through friendlyError()
unchanged so call sites can ship precise localized stories through the
shared presentation; SystemActions gains resolvedChainBinary() plus
run/resolve test seams; ChainErrorBox hugs its content instead of
filling an unbounded dialog; the wizard's answers file is written
synchronously (the async dart:io variants never complete under the
widget-test fake-async zone).
Verified: flutter analyze clean, 53 tests green (6 new wizard error-
path tests incl. clipboard round-trip), plus a live GUI walk on macOS
in dark + light with a stale binary (skew dialog, copy verified via
clipboard) and with the real binary (TCC pre-explanation with the
resolved path, full plan preview).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The regulated setup path sends the operator to the stores dialog to
pin a publisher key — but the field was labelled 'Angepinnter
Public-Key — PEM (optional)' with du-form developer prose (PEM,
vendor key) at exactly the trust-critical moment. Field now reads
'Signatur-Schlüssel anheften (PEM, optional)' with a plain-language
Sie-form explanation of what pinning does; the dialog intro and the
onboarding checklist follow (MCP jargon explained in the sentence,
developer-only follow-up cards labelled as such).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Regulated path finishes without a terminal: the signed-source
state offers 'Add a signed source…' (stores dialog with pin-a-key)
plus the per-module install buttons and a plain-language hint why
pinning the publisher's key matters — instead of a hint with no
affordance.
- Apply warnings (e.g. the empty-trusted-publishers caveat) surface
selectable in the done state instead of being swallowed.
- Truthful preview: new lines state which machine is being set up
(server/container targets configure THIS machine), that regulated
profiles always get the hash-chained audit log (even with WORM
off), and that the curated reading list is stored with the setup
record.
- Language pass: onboarding checklist in Sie-form + 'System-KI'
(was du-form + 'System-AI'), 'Audit-Sperre' jargon replaced,
answers file moved to a private per-dialog temp dir.
- Screenshot harness: GUIDE_SHOTS_THEME=light for light-parity
proof runs.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The wizard's first step now offers 'or just describe what you want
to do': the goal goes to the configured system AI, which maps it
onto the menu answers (validated against strict enum whitelists —
a hallucinated value can never reach the engine). The suggestion
comes back as an editable plain-language reflection ('this is how I
read your task') the operator can adjust step-by-step or take to
the same preview/apply the menu path uses. Trust rules per
guided-setup.md: suggestion only (never auto-apply), a privacy line
states whether the description is processed locally or sent to a
provider, and without a configured system AI the section explains
that the menu always works — no dead end.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Post-apply the wizard now renders real Studio actions instead of CLI
text: a start-hub button that polls until the daemon answers,
per-module install buttons (capability-name install via the hub's
store index) with done/progress states, and an open-the-starter-flow
button that navigates to the Flows page. Regulated plans explain in
plain language that modules come from a signed source; the preview
offers 'allow installing from the public store' as one deliberate,
reversible switch that re-assembles the plan (allow_unsigned_modules).
Fresh installs (no config, no setup-plan.yaml) auto-open the wizard
once per run — the wizard IS the onboarding — and it steps back once
a setup exists. The welcome CTA is framed honestly ('get started in
3 questions'), and after the wizard closes the onboarding checklist
remounts, re-probes, and says what the assistant already covered
(profile line from setup-plan.yaml) instead of acting as a second,
disconnected onboarding surface.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Reworks the Setup-Assistent toward the zero-learning-curve bar
(docs/architecture/guided-setup.md, phase 1.1):
- Every scenario/intent/target choice is now a localized option CARD
with a one-line plain-language explanation of what it configures
(DE+EN, Sie-form) — replacing the bare dropdowns whose labels were
English enum humanizations ('Regulated Production', 'This Laptop').
- Three explained steps with a 'Schritt n von 3' progress line
(stakes → task → environment); the two adaptive toggles move to the
last step in plain language (no 'air-gapped' jargon).
- The review step renders a localized PLAIN-LANGUAGE summary built
from 'chain init --answers --plan-json' (the structured SetupPlan) —
'Ch∆In richtet einen regulierten Betrieb ein: signierte Module
verlangt · … · geändert wird nur ~/.chain/config.yaml' — instead of
echoing the CLI's English prose. Warns when an existing config will
be overwritten. After apply: a plain 'Fertig' + next steps.
flutter analyze clean; widget tests for the step flow + German option
labels. Remaining per plan: clickable follow-up actions, signature
dead-end fix, placement/auto-open, and the LLM free-text path.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The workspace switcher now lists the operator's sealed areas (read from
~/.chain/sealed/ manifests, the same source the CLI uses) below the
shared projects, each with a lock icon and a running/stopped status.
Selecting one is a real connection switch: Studio reconnects its hub
client to the area's own port with a full state reload — one window,
one truth. A stopped area is started first (chain project start) with a
visible notice; a failure surfaces as a copyable error and rolls back to
the shared hub.
While in a sealed area an identity bar under the AppBar is painted in
the area's accent colour and names it, with a one-click Leave back to
the shared hub. The area colour is marking, not theming — Studio's blue
stays the app accent. Selecting a shared project from inside an area
switches the connection back first. The sealed connection is never
persisted across restarts.
New: SealedAreaService (manifest + PID discovery), Workspace sealed
switch logic, ChainSealedIdentityBar, SystemActions.chainProjectStart.
l10n DE+EN. flutter analyze clean; 33 tests green (switcher lists sealed
with lock+status, pill shows active area, identity bar renders in the
area colour). Runtime plumbing (discovery, start, endpoint, reach)
verified headlessly against real sealed instances under a redirected
HOME; the identity-bar screenshot is deferred (display click-automation
failed after sleep on the shared desktop — an environment issue, not a
code gap; the visible components are widget-tested).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
New Runs sidebar destination listing detached invocations (detach:true)
with phase, current step, project and a Cancel button while
pending/running. Workspace-scoped like Audit/Approvals, polls every 2s.
Detached runs are opt-in (detached.enabled) — the empty state explains
how to enable them. Inline help doc DE+EN. DetachedRun model +
listDetachedRuns/cancelDetachedRun in HubService, backed by the SDK's
listInvocations()/cancelInvocation(). flutter analyze clean; 29 tests
green (sidebar Y-stability updated for the new destination, model
mapping unit-tested).
Screenshot verification (light+dark) deferred — shared desktop in use.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Multi-project stage 1 against the shared hub (platform design
docs/architecture/projects.md, § Studio):
- ChainWorkspaceSwitcher in the Audit + Approvals AppBars: lists the
registry (colour dot per project, shield for protected, honesty
tooltip), 'All projects' stays reachable — a filter, not a jail.
Selection is persisted and shared via the Workspace notifier.
- Audit page: list query AND live stream re-scoped hub-side on switch.
- Approvals page: pending + history scoped; the sidebar badge counts
the active workspace's pending approvals.
- Flow runs are stamped with the active workspace; a flow file
carrying its own project: keeps it (file wins, CLI semantics).
- Data layer: listProjects/ProjectRef; project fields on AuditEvent,
PendingApproval(+Record), SavedFlow; project params through
HubService. l10n DE+EN. Widget tests for the switcher contract.
Visual verification (light+dark screenshots) still pending — the
shared desktop was in active use; code paths are covered by
flutter test (26 green).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- approvals: empty/legacy hub prompts render the localized fallback;
approving without show: data asks for conscious confirmation first
- chain_log: write to ~/.chain/logs/studio-errors.log (was .fai),
one-time best-effort migration of the legacy file + rotation sibling
- l10n: 'manipulationssicher' -> 'manipulationserkennend', neutral
WORM-1 blurb, doctor pill 'Integritätskette v1', federation hint
says the CA authenticates the first connect (DE+EN)
- theme: muted text token now >=4.5:1 on canvas, cards and elevated
dark surfaces (was 3.7:1 on cards)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The grouped store showed the hub's English category labels verbatim
(Documents, Data & Formats) even in German. Map the canonical slug to
DE/EN via l10n (storeCat*), and localize the Modules/Studio segment
(storeSegment*). Falls back to the hub label for an unknown slug.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The welcome hero subtitle described Ch∆In as 'AI-assisted document
processing' / 'KI-gestützte Dokumentenverarbeitung' — too narrow. The
canonical product line is 'AI-assisted data processing' (flows also
handle streams and general data, not only documents). Fixed in both
locales (arb + generated app_localizations).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
StoreItem gains source (mapped from StoreEntry.source); the store grid
shows a 'from <store>' label for operator-added stores (bundled seed
unlabelled). Foundation for grouping by store. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
friendlyError now pattern-matches module-download failures ('download
failed: ...') and renders a clear, copyable headline + the URL/status
detail, instead of letting the gRPC-Unavailable default show the generic
'hub not reachable' banner. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A Welcome 'Setup assistant' button opens a wizard that collects
scenario / intent / target (+ approval & data-local toggles), then calls
`chain init --answers` to preview the assembled plan and `--apply --force`
to write the config — reusing the Rust deterministic engine, no logic
duplicated. New SystemActions.chainInit; copyable errors via
showFaiProcessError; EN+DE l10n. analyze clean; smoke test + existing
welcome/sidebar tests pass.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The module-store manager's 'Add a store' form gains an optional PEM
public-key field; when set it pins that publisher key to the store
(per-store signing trust). Localized DE/EN.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The approval card only rendered the payload section when a preview
existed, so a step with no 'show:' showed nothing and the reviewer
could not tell why. Now always show the section: a present payload
scrolls inside a height-capped, copyable box; an absent one shows an
explanatory hint (the flow's approval step chooses what to surface via
its 'show:' field). Relabel 'data to be released' -> 'data to review'
(the payload is review context, accurate to its source).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- store: repair the filter dialog crash (a Spacer lived directly in
AlertDialog.actions, which is an OverflowBar, not a Flex — it threw
and rendered a broken dialog). Buttons now sit in a Row.
- store: promote the module-store manager from a bare icon to a
labelled 'Add store' button, and fully localize the dialog (DE/EN).
- store: add a curated 'Suggested stores' shelf with one-click
add/remove (first entry: Recl∆Im). Each suggestion is probed for
reachability and shows 'not available yet' until its index is
published, instead of failing only on click. Fail-open on network
errors so a transient hiccup never hides a real store.
- sidebar: the channel pill is now a one-click channel switcher
(menu with per-channel running state + active check; switching
writes ~/.chain/current-channel, restarts the daemon, and Studio
repoints to the new channel).
- approvals: lead the card with the human prompt ('what am I
releasing?') and demote the flow/step id to a metadata line; clear
fallback when the step left the prompt empty.
- welcome: tidy the docs grid into equal-height paired rows with a
full-width trailing card for the odd one out.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Studio design system, widgets and helpers carried a Fai* / fai_
prefix (FaiSpace, FaiColors, FaiTheme, FaiLog, 17 fai_*.dart files, the
faiBinary* l10n keys). Studio is the Ch∆In product, so rename them to
Chain* / chain_ — carefully preserving English fail/failure/failed.
Also fix stale references: the 'fai' binary in l10n strings -> 'chain',
FAI_* env vars (FAI_BIN/DATA_DIR/MODULES_DIR/TODAY/BOOTSTRAP_TOKEN) ->
CHAIN_*, fai_platform -> fai_chain, fai_hub -> chain_hub. Vendor
security-hook tooling (FAI_BANNED_TERMS_FILE) + the .fai bundle ext left.
flutter analyze + test: clean (20 passed).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Track the platform rename: the hub spawn path is now ~/.chain/bin/chain
(was ~/.fai/bin/fai.exe on Windows — both dir and binary were stale, so
Studio could not launch the hub after the config-dir rename), the
~/.fai/* help strings become ~/.chain/*, FAI_REGISTRY_TOKEN ->
CHAIN_REGISTRY_TOKEN, and the two in-app doc URLs point at the public
fai/chain repo (fai/platform was renamed to the private fai/chain-private).
The .fai module bundle extension is left unchanged (format phase).
flutter analyze: no issues.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio follows the platform rename: product branding F∆I -> Ch∆In in UI
strings, command examples fai -> chain, and — critically — the spawned
hub binary path ~/.fai/bin/fai -> ~/.fai/bin/chain so Studio launches
the renamed binary. The fai_* Dart identifiers (FaiLog, widget files,
the generated SDK) stay = vendor/internal namespace. flutter analyze:
no issues.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A new 'Föderation' destination (primary side) lists connected
satellites — name, region, version, wire version, advertised
capabilities — and adds them in one step: 'Add satellite' issues a
single-use bootstrap token bundled with the primary CA as a
ready-to-paste satellite config (the bundled CA makes the first
connect tamper-proof). Localized EN + DE, in-app help doc. Uses the
new HubService.listSatellites / issueSatelliteToken wrapping the
SDK's federation methods.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Connection-aware Welcome: when the hub is down, show a hero with a
primary "Start hub" CTA + install fallback instead of a dead,
all-unchecked onboarding checklist (the first-run cliff).
- Actionable binary-not-found (file picker + install link, not a
"set FAI_BIN" dead end) and a connect-failure banner after
repeated failed health polls.
- Localize six hardcoded English error/toast clusters (DE+EN ARB).
- Bundle Inter + JetBrains Mono as assets; drop the runtime
google_fonts fetch (air-gap / KRITIS safe, no font-swap flash).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Generic gRPC-code mapping was right but not specific enough.
A flow failing with an approval-timeout used to land on
'Deadline exceeded — try again later'; now it reads 'Freigabe-
Timeout abgelaufen — entweder timeout_seconds erhöhen oder
den Reviewer informieren.'
New pattern matchers in _matchHubPattern, runs before the
gRPC-code switch. Six FlowExecutionError shapes covered:
- approval rejected ("rejected by")
- approval timeout
- output too large ("exceeding the X MB cap")
- host service not declared
- missing value reference
- MCP endpoint unreachable
- capability not installed (NotFound fallback)
Every match comes with a localised hint pointing at the
concrete fix path (audit log / timeout config / Integrations
panel / Text-tab Fix button).
Five new tests pin the matchers — would catch a silent
regression when the hub renames a variant Display string.
All 11 friendly_error tests + 19 Studio tests green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three operator-UX gaps closed:
- Settings dialog's six-category sidebar (General / Appearance /
System AI / Integrations / Security / Maintenance) was
hardcoded English; now flows through AppLocalizations
("Allgemein" / "Darstellung" / "System-KI" / "Integrationen" /
"Sicherheit" / "Wartung"). Same for the per-panel title +
description.
- Per-channel daemon-action labels ('enable autostart' /
'disable autostart' / 'daemon restart' etc.) and the
OK / Failed result line in the toast also moved to l10n,
so the system-action feedback reads as one language.
- New 'Approvals' doc bundle (en + de) under assets/docs/,
registered as a fifth doc card on Welcome plus exposed via
the new public helper. The
Approvals, Audit and Doctor app-bars grow a Help icon button
next to Refresh that opens the matching doc in the existing
bottom-sheet reader — no extra screen, no learning curve.
Studio bumped to 0.67.0; editor path-override pulls in 0.20.1
(flow-list row polish).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The previous Add-source dialog was English-only and
operator-hostile — answered 'where do I install from?' without
explaining what a private module *is*. New version, DE + EN:
- Title + intro + button labels routed through AppLocalizations
("Modul-Quelle hinzufügen" / "Installation fehlgeschlagen"
instead of raw English strings).
- 'How private modules work' explainer block (3 sentences):
what a module is (`module.yaml` + WASM), how to package
it (`fai pack <dir>` → .fai bundle), where to host it
(any URL: own Forgejo / GitHub / S3), what verification the
hub does (sha256 + signature against trust store).
- Honest about the Studio gap: the dialog can install URLs +
packed bundles, but unpacked source directories still
require `fai install --link <path>` on the CLI. The
example command lives in its own code-style box, selectable.
- Layout: SingleChildScrollView'd so the explainer doesn't
push the buttons off short viewports.
Studio bumped to 0.66.0; editor path-override pulls in 0.20.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two operator-visible fixes prompted by 'I picked a theme but
nothing changed':
- Theme picker tile taps now show a brief "Theme applied:
<name>" snackbar — the picker applies themes instantly, so
the operator needs a confirming cue. Slow `_pluginThemes`
loads no longer read as "click did nothing".
- `_pluginThemes` failures (plugin unreachable, manifest
drift, etc.) write to `FaiLog` so `fai admin doctor` and
Studio's inline log viewer can surface them. Previously
swallowed silently, which is what made debugging this so
miserable.
- Settings dialog's primary button relabelled to
"Connect to endpoint" (was "Save & connect") so operators
don't mistake it for "save my theme choice". The theme
selection persists at tile-tap time; the Settings dialog
has nothing left to "save".
- Theme section header gains an explicit "(applies instantly)"
cue for the same reason.
Also fixes a pre-existing curly-braces lint in the n8n add-
endpoint dialog. Studio bumped to 0.62.1, editor pinned via
path override at 0.15.1.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Bundles the error-UX overhaul and the inline log viewer:
- New `FaiLog` (`~/.fai/logs/studio-errors.log`, 256 KiB rotation,
JSON-per-line). Every operator-visible failure is appended so
`fai admin doctor` and the new viewer can show the trail
without the operator having to reproduce the failure.
- New `showFaiErrorSnack` / `showFaiErrorDialog` helpers wrap
`FaiErrorBox` in copyable surfaces; 27 ad-hoc
`SnackBar(content: Text(e.toString()))` sites swept to use
them (settings, doctor, audit, store, module sheet, system-AI
editor, flow output).
- New `FaiLogViewer` modal (`showFaiLogViewer`) renders log
files inline with line numbers, JSON-key + `[level]` token
colouring, Copy-all, Refresh, Open-externally. Doctor's
daemon-paths panel grows a "View" button next to "Open" for
every `.log` row and now also lists the Studio errors log.
- Today carousel: CTAs now actually re-run search after a
`filterCategory` / `runQuery` story is tapped (was only
flipping the chip state). Fallback story list bumped to 8.
- Editor bumped to git ref carrying 0.15.0 (type-token
colouring + analyzer diagnostics).
Studio bumped to 0.62.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three changes:
1. Onboarding checklist hints no longer mention DeepWiki,
Semgrep, text.extract, or extract-summarize.yaml by
name. Brand- and file-specific copy moved to neutral
feature pointers ('add an MCP source', 'install a
module'). Brand names belong on the welcome page only
if they're load-bearing for understanding, which they
aren't.
2. Checklist rows are now clickable. Tapping a row navigates
to the page where the operator can complete it — MCP +
AI open Settings, Module opens Store, Flow opens Flows.
StudioShellState gains a public navigateTo(pageId) helper
so descendants can drive sidebar selection without
plumbing a controller through props.
3. Theme picker hint copy rewritten. Old hint suggested
'Custom' was a single-colour tweak; new copy spells out
that Material 3 derives a full palette (primary,
secondary, tertiary, surface, …) from one seed colour.
The Custom tile shows a small tune icon so its
open-the-picker semantics is visually distinct from the
apply-immediately plugin tiles.
Editor bumped to 0.12.0 (panel toggle + LabVIEW-style port
colours).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Settings dialog's Theme Plugin section is now a grid of
swatched tiles:
- Built-in (none) — falls back to FaiTheme.light/.dark
- One tile per installed studio.theme.* plugin, each
showing the plugin's primary/secondary/tertiary as
live colour dots. Tile loads its preview lazily so a
dozen installed themes don't block the picker.
- Custom — opens a colour-picker dialog with 12 curated
Material presets + a hex input + live preview. Selecting
applies ColorScheme.fromSeed for both brightnesses.
main.dart's _pluginThemes parses a 'custom:#RRGGBB' sigil
in the same notifier slot as plugin capability ids, so the
existing persistence + restoration paths cover the custom
case with no new state.
Bumps editor to 0.11.0 (type-checked port connections +
dynamic card width fix + card-height border allowance) and
Studio to 0.58.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The connection-row tooltip, the _ConnectionLabel caption,
the footer settings tooltip, and the channel-pill explainer
were hardcoded English even when the running app was set to
German. Move all four through AppLocalizations.
Adds ARB strings (de + en):
- connectionTapToStart antippen zum Starten / tap to start
- sidebarSettingsTooltip Einstellungen (Cmd-;) / Settings (Cmd-;)
- sidebarChannelTooltip multi-line channel explainer
Existing connectionConnected / connectionUnreachable /
connectionConnecting are reused as the caption pieces; only
those two new strings (plus the channel tooltip) needed
adding.
Version 0.51.7 -> 0.51.8.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three operator-visible improvements per Stefan's review of
the v0.50.0 editor.
1. Pencil icon on Flows page now opens Studio's own flow
editor (route push) preloaded with the selected flow,
replacing the previous "open in OS default editor"
(SystemActions.openInOs) behaviour. The editor's AppBar
gains a back arrow when reached via route push; reaching
the editor via the nav rail leaves it bare. Tooltip
string updated in EN + DE.
2. New FlowEditorPage `initialFlowName` parameter. When set,
the page loads that flow on first frame (via post-frame
callback so the BuildContext is mounted before
_openByName runs). When null (the nav-rail path), the
editor opens to its empty state as before.
3. Sidebar (_Sidebar) is now collapsed-by-default: shows
just icons in a 72px-wide rail with per-destination
tooltips. Hovering the rail expands it to 220px (the
old width) with brand-mark + labels + the full footer
row (theme toggle, language toggle, clock, settings).
Collapsed footer shows the settings icon only. Brand-
mark (FaiDeltaMark) stays visible in both states so the
live/idle status dot is always glanceable.
Side-effect: SystemActions import in flows.dart is no
longer needed (the pencil no longer shells out) — removed.
widget_test.dart: dropped the per-destination Text-presence
asserts since labels are now Tooltips when collapsed.
Hover-expand testing triggers RenderFlex-overflow mid-
animation in widget tests (the AnimatedContainer's width
transitions through a constraint slimmer than the Row's
intrinsic min). The booting-without-throwing assertion
remains; per-destination presence stays in the per-page
test suites.
Both arb files updated with the new strings (navFlowEditor
already existed; added flowEditorBackTooltip + retouched
flowsOpenInEditorTooltip).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
New top-level destination "Editor" (Cmd+5) ships as Studio's
fifth surface. The editor reads + writes flow YAML directly
under ~/.fai/data/flows/ via dart:io — the hub picks up the
changes on the next listFlows / runSavedFlow call.
Layout: two-pane shell. Left (240 px) is the file list; right
flexes to the code pane and an optional results column when
Run produces output. Top toolbar exposes:
* filename + dirty-mark
* New flow (scaffolds from a debug.echo template)
* Save (writes the active file to disk)
* Run (saves first if dirty, calls
HubService.runSavedFlow, surfaces typed FlowOutputs in
a side panel)
* Refresh
YAML highlighting via flutter_code_editor + the highlight
package's yaml language. Lightweight style map mapping the
five token classes that actually appear in flow YAML
(attr / string / number / comment / subst for the
${{ ... }} template syntax) to FaiTheme colors — keeps the
editor visually consistent with the rest of Studio.
New-flow naming uses a FilteringTextInputFormatter that
restricts the name to [a-z0-9_-]. A "name already exists"
SnackBar surfaces the conflict instead of silently
overwriting.
Bilingual strings shipped (en.arb + de.arb) for every
operator-facing string: toolbar buttons, dialogs, empty
states, file-exists error, run-output header.
New deps:
* flutter_code_editor ^0.3.5
* highlight (transitive — pinned as direct so the
yaml-language import has its declared dependency).
Smoke-test (test/flow_editor_test.dart) pumps the page and
asserts the empty-state + toolbar render without throwing
on hosts that don't have ~/.fai/data/flows yet. The full
file-list + open-on-tap flow needs a writable HOME override
which dart:io's read-only Platform.environment doesn't allow
inside a test isolate — that path lives in the integration
suite as a follow-up.
Version bumps:
* pubspec.yaml: 0.49.1 → 0.50.0
* main.dart kStudioVersion: 0.42.0 → 0.50.0 (had drifted
behind pubspec; brought back into sync as part of this
bump)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two operator surfaces shipped together:
**Multi-version uninstall picker** — when more than one version
of a `(provider, name)` is installed side-by-side, both the
module-sheet "Uninstall" affordance and the store-detail
"Uninstall" affordance now ask the operator which version to
remove before calling the RPC. The hub's wire-level support for
this (UninstallModuleRequest.version) was already there; Studio
just wasn't using it. Picker pre-selects the highest version so
single-version flows still take one click.
- `HubService.installedVersions(name)` enumerates the installed
versions via the capabilities list.
- `HubService.uninstallModule(name, version: ...)` forwards
the version into the RPC.
- `_UninstallVersionPickerDialog` (module sheet) and
`_StoreUninstallVersionPickerDialog` (store) host the
picker — separate widgets so each surface can evolve copy
independently. Uses `RadioGroup<String>` for Flutter
3.32+ deprecation compliance.
**Default scope editor** — new DEFAULT SCOPE panel in Settings
that calls the freshly-added HubAdmin RPCs
`GetDefaultScope` / `SetDefaultScope`. Operators can:
- reorder publisher segments with up/down buttons
(first match wins in the bare-form resolver),
- delete entries (hub still rejects empty list — Studio
surfaces the constraint inline),
- add arbitrary entries via the text field,
- add catalog-known publishers via suggestion chips
(sorted alphabetically, populated from the catalog).
Every change persists to `~/.fai/config.yaml` via the hub
and hot-swaps the in-memory copy without a daemon restart.
Bumped pubspec to 0.48.0. dart analyze clean (No issues
found!); flutter test green (11 tests).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Store cards + detail-sheet now prefix the version pill with
`~` and attach a tooltip for federated entries (MCP / n8n /
Temporal). Upstream services don't honour semver, so the
version pill is a label, not a contract — the tilde says
"this number may change without a version bump."
Three render sites updated to stay visually consistent:
- compact card pill in grid view
- expanded card pill row
- detail-sheet header pill cluster
EN + DE l10n entries added (`storeAdvisoryVersionTooltip`)
and `app_localizations.dart` regenerated.
dart analyze clean; flutter test green (11 tests).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio gains a new "HUB AUTHENTICATION" panel in Settings
mirroring the existing registry-credentials panel:
- `lib/data/hub_auth_token.dart` — `~/.fai/hub-auth-token`
helper (read / write / clear, mode 0600 on Unix). Sister
of `RegistryToken` with the same on-disk hygiene.
- `HubService.loadPersistedEndpoint` now reads the token at
startup and reconnects with it. `reconnect()` grew an
`authToken:` parameter with a sentinel that distinguishes
"keep current" from "drop". `reloadAuthToken()` is the
one-liner Settings calls after save / clear.
- `_HubAuthTokenPanel` in `fai_settings_dialog.dart` — paste
with show/hide toggle, save button, clear button, status
pill ("Configured (40 chars)" / "Not set (anonymous)"),
storage-location hint. Trimmed token length only — the
secret never round-trips back into the UI after save.
- EN + DE ARB entries (`hubAuthToken*`) + regenerated
`app_localizations.dart` keep the bilingual surface
consistent.
The hub side (auth.tokens config + tower middleware) shipped
on the platform side 2026-05-28 (43a54a2). Until now an
operator had no GUI path to consume it: they had to find the
file in their home dir, paste the token by hand, and bounce
Studio. This panel closes that loop.
Bumped pubspec to 0.47.0. dart analyze clean (No issues
found!); flutter test green (11 tests pass).
Block E item 1 of 4 done. Capability-picker badges,
default_scope editor, multi-version uninstall picker follow.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Adds the missing UI surface for SPARK / Temporal federated
capabilities. Previously only mcp and n8n showed provenance
pills; temporal-sourced entries fell through to the default
"no badge" case.
- storeSourceTemporal + storeProvenanceTemporal l10n keys
(en + de). Pill format: "temporal · <provider>", icon
Icons.timer_outlined, accent tone.
- Source filter chip row gains a "Temporal" option in the
Store filter dialog.
- `_StoreProvenancePill` adds a `case 'temporal'` branch.
Operators federating a SPARK cluster (`services: -
kind: temporal`) now see their workflows visually labelled
as Temporal-sourced in the Store grid + filter UI.
dart analyze green. No test changes required — the
provenance pill is render-only.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two pieces of the Studio plugin host:
- `data/theme_plugin.dart`: discovery, persistence, ColorScheme
translation. Plugins listed via list_capabilities filtered
to studio.theme.*; selection persisted in SharedPreferences;
loadThemePluginSchemes builds a ColorScheme pair from the
plugin's 14 ARGB tokens per brightness.
- `main.dart`: StudioApp gains themePluginNotifier +
setThemePlugin(). MaterialApp wraps a FutureBuilder that
re-fetches the plugin's ColorSchemes whenever the
capability flips; falls back to FaiTheme.light/dark on
null or load failure.
- `fai_settings_dialog.dart`: new `_ThemePluginPanel` shows a
dropdown of installed studio.theme.* capabilities + a
"Built-in" entry. Switching applies immediately.
- HubService.invokePluginTranslate added as the typed wrapper
for the new gRPC RPC — ready for the FaiEnBadge swap-out
in the next iteration.
- 4 new l10n keys (themePluginHeader / None / Hint / Empty),
EN+DE.
flutter analyze + flutter test (widget + friendly_error): both
green. The integration test for the theme picker is the
existing fai_runtime plugin_theme + Studio-side
invokePluginTheme path that round-trips through the new
mirror-installable studio-theme-solarized bundle.
Signed-off-by: flemming-it <sf@flemming.it>
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Second half of the May-2026 trust pass. Drops the wall of
gRPC trailers from every error surface and makes the Store
honest about what is and isn't installable.
Friendly errors:
- New `friendlyError(Object, AppLocalizations)` mapper turns
GrpcError + arbitrary throwables into a localised headline,
optional recovery hint, and a verbatim detail string kept
behind a "Show details" expander. Duck-typed on `.code` /
`.message` so Studio doesn't have to depend on package:grpc
directly.
- `FaiErrorBox` gains an `error:` constructor that runs the
mapper. Every call site that used to render
`snap.error.toString()` (flows, welcome, store) switches to
it.
- 9 .arb entries per locale cover the gRPC codes we actually
emit (INVALID_ARGUMENT, NOT_FOUND, ALREADY_EXISTS,
PERMISSION_DENIED, FAILED_PRECONDITION, INTERNAL,
UNAVAILABLE, UNAUTHENTICATED) plus copy/details affordances.
- `test/friendly_error_test.dart` — 6 unit tests for the
mapper. Covers the mapping table, locale-switching, and the
non-gRPC fallback so future regressions show up in CI.
Capability discovery:
- New `HubService.allCapabilities()` reads the kind-aware
capability list (wasm + builtin + federated) and returns a
Dart-side `CapabilityInfo` value type. The flow page's
missing-dependency check uses it so `system.approval` and
federated MCP/n8n tools count as "available" — fixes the
Run button staying disabled forever.
- `HubService.listModules()` filters to kind=wasm so the
Modules page doesn't sprout synthetic "system" entries that
the operator can't uninstall.
Store clarity:
- New "Installable only" filter, on by default. Roughly 2/3
of seed entries currently carry `status: planned`; the
default view stops being noise.
- Featured-strip cards for planned modules now show a
"Coming soon" pill instead of an empty action area.
- Main-grid cards for non-installable modules dim to 60%
opacity so the eye lands on actionable cards first.
- Detail-sheet "Nicht installierbar" tooltip → inline hint
box. The reason is visible without hovering.
MCP localisation:
- `_kMcpSuggestions` no longer holds 11 hardcoded English
description strings. The `description` field is replaced
with a `resolveDescription(AppLocalizations)` lookup that
switches on the suggestion `name` to read the matching
`mcpSuggestion*Desc` .arb key. EN + DE shipped.
- New `FaiEnBadge` widget renders a small `[EN]` pill when
the active locale isn't English. Used next to MCP /
federated store entries' tagline + description because
the server supplies them in English and we can't translate
on the fly yet — the badge is the honest signal until the
planned `studio.translate` plugin lands.
Plus housekeeping: removed the unused `_keepImport` lint
escape in the test and the dangling library doc-comment in
`format.dart`.
Signed-off-by: flemming-it <sf@flemming.it>
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Documentation system (the original "whole docs system is broken"
complaint):
- Studio reads inline docs from disk via the new
getInstalledModuleDocs RPC. No network, no auth, no provider
lock-in.
- store.dart probes for MODULE.md eagerly when a module-detail
sheet opens (a single file stat). The Documentation section
only renders when the bundle actually shipped docs.
- Shared FaiTheme.markdownStyle helper used by Welcome's
DocReaderSheet and Store's DocsPanel so every inline doc
reads in the same typography. The shared style forces
code.backgroundColor = transparent to suppress the per-span
bands flutter_markdown's default code style draws on dark
themes.
Flow run dialog:
- Run-button gating now strips the @version suffix from
installed capabilities before the contains() check. Without
this fix the button stayed disabled for every flow with
dependencies, even after a successful install.
- Studio derives a MIME type from the picked file's extension
(small per-suffix map; .pdf, .docx, .txt, .json, ...) and
forwards it to the hub. Fixes "unsupported MIME type:
application/octet-stream" from text.extract.
- Dialog title tracks the future's state: running -> "extract
laeuft", success -> "extract -- Ergebnis", failure ->
"extract -- fehlgeschlagen".
- Output rendering moved from String stringification to a
sealed FlowOutput type (Text / Json / Bytes / File / Unknown).
A new FaiFlowOutput widget dispatches per variant: markdown
for text/markdown (heuristic), pretty JSON for proto Struct,
inline image preview + Save-As for bytes, Open for file URIs.
Byte sizes:
- New humanBytes() helper renders 23.3 kB / 1.04 MB style values
with three significant digits, matching Finder / GNOME Files.
Wired into flow-card pills, picked-file readouts, and the
bytes-payload preview line.
Signed-off-by: flemming-it <sf@flemming.it>
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The hub's v0.10.91 install error message already tells the
operator exactly what to do — set FAI_REGISTRY_TOKEN or save
to ~/.fai/registry-token via Settings. But that text lives in
a FaiErrorBox inside the install dialog. Reading the buried
recovery instruction, finding Settings, scrolling to the
Registry credentials panel, pasting, then re-clicking the
install pill is five hops for what should be one.
When at least one item in the install dialog fails with the
"registry returned an HTML page" / "no registry token
configured" signature, the dialog now surfaces a prominent
filled "Add registry token" button next to Close. Click closes
the install dialog and opens the Settings dialog directly so
the operator pastes + saves without losing context. After
Settings dismisses, the operator is back at the flow card and
re-clicks the same pill to retry.
Detection is signature-based (substring match on the hub's
error text) so it activates whether the install was a single-
pill click or an "Install all" sequence. Other failure modes
(network down, signature invalid, sha mismatch) still show
just the Close button — the CTA is specific to the auth-wall
case it can actually unblock.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
UI parity with the platform CLI: `fai reset` (v0.10.93) is now
reachable from Settings. The panel shows the reset blurb plus
two checkboxes mirroring the CLI flags (Keep modules / Keep
audit log + saved flows), then a destructive-styled "Reset hub
state" button. Click goes through a confirm dialog before
SystemActions.faiReset is invoked.
After the CLI returns, Studio bounces its gRPC channel against
the same endpoint (the daemon restarts on the same channel +
port, so no Settings change needed) and reloads every panel:
channel status, system AI, MCP clients, n8n endpoints, registry
token. Output (success or failure) is shown in a copyable error
box so any unexpected stderr lands somewhere the operator can
paste from.
Sits at the bottom of the dialog under "HUB MAINTENANCE",
separated from the everyday config so a destructive button
doesn't crowd the day-to-day controls.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The hub install path now reads `~/.fai/registry-token` as a
fallback when `FAI_REGISTRY_TOKEN` is unset (platform v0.10.92).
Studio now writes that file directly: a fresh operator pastes
the PAT into Settings → Registry credentials, hits Save, and
the next install attempt resolves the auth wall without any
shell or env-var setup.
The token never round-trips back into Studio after save —
status is shown only as "Configured (40 chars)" / "Not set"
with no display of the secret itself. The Clear action deletes
the file. On Unix the file is chmod-ed to 0600 (owner-only
read/write); Windows leaves the default user ACL in place.
Storage is strictly local: `~/.fai/registry-token`, never sent
to a remote service. The hint text under the field says so to
make the data flow explicit.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
When a saved flow is missing modules, each capability pill in the
"Needs:" row is now clickable: tap one and a per-item progress
dialog walks the bare capability name through installModule, then
the flows page refreshes. When more than one capability is missing,
an extra "Install all (N)" button runs the same dialog over the
whole list sequentially so a fresh operator can take an unrunnable
flow and one click later have its dependencies resolved.
Also adds a pencil icon next to Run that hands the YAML path to
the OS via SystemActions.openInOs — the operator's default editor
for .yaml decides what opens. Makes the path next to the flow name
actionable instead of decorative.
The install dialog renders one row per spec with a status icon
(pending circle / spinner / check / error), shows the installed
version on success, and surfaces the full error in a copyable
FaiErrorBox on failure so the operator can paste it back.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Four UX threads stitched into one commit. Each pulls Studio
toward Stefan's "zero-learning-curve" goal — the feedback
that earned its own memory entry.
1. Flow-Runnability-Indikator
─────────────────────────
The Flows tab now fetches `listFlows` and `listModules`
in parallel. Each card compares the flow's
`requiredCapabilities` against the installed-modules'
capability set; rows with missing modules show a "Needs:
text.extract@^0" red pill row beneath the path and have
their Run button greyed out + tooltip
"Install the missing modules first." Operators stop
hitting Run → cryptic hub error → frustration.
2. Welcome-Checklist Celebration
─────────────────────────────
Once all four checklist signals flip to done, an
`_AllDoneCelebration` card replaces the bare
"All four steps complete" + Hide button. Three concrete
next-threads with action buttons: "Read the audit log",
"Set up the daily Today story" (opens the Flows / Today
doc inline via `_DocReaderSheet`), and "Build your own
module" (opens the architecture doc). Operator who just
got set up sees what to do next instead of an empty
"what now?" feeling.
3. Audit-Page Time-Bucket Headers + Flow-Run Detail
────────────────────────────────────────────────
The flat event list grows tiny "TODAY / YESTERDAY /
EARLIER THIS WEEK / OLDER" section headers — bucket is
computed in the operator's local timezone so an event at
23:55 yesterday in Berlin doesn't end up in "today"
because UTC happened to spill into a new day.
Plus: the event-detail dialog gains a "View flow run"
action when the picked event has a `flow_execution`. It
opens a drill-down that lists every event in the
already-fetched 100-event window sharing the same
execution id, sorted ascending — the operator reads the
run from step.started top to flow.completed bottom.
4. Approvals-Batch-Aktionen
────────────────────────
Each pending approval card grows a checkbox. When ≥1
selected, a floating action bar appears at the bottom
with "N selected · Select all · Clear · Reject all ·
Approve all". The parent loops sequentially through the
per-record SDK calls so a partial failure produces
"X done, Y failed" instead of a confusing all-or-nothing
rollback. Reject prompts for a reason once and applies
to the whole picked set.
13 new ARB keys cover the strings the four features
needed. Studio's tests stay green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The free-form key=value run-flow dialog produced two
unhelpful failures every time an operator hit Run:
1. Submit empty → "step references missing value
'\$inputs.document'" from the hub. Studio sent a zero-
entry inputs map because nothing told the operator the
flow declared a required input.
2. Type `document=@/path/to/file` → "path not found".
Dart's `File()` doesn't expand `~`, and on macOS
sandboxed Studio can't read arbitrary paths anyway.
Both failure modes are gone. The dialog is now a typed form:
- On open, fetches `getFlowDefinition(name)` (new SDK
v0.15.0 wrapper around the v0.10.89 hub RPC). While that
resolves, a small spinner shows
"Loading inputs…"; on failure, an inline `FaiErrorBox`
with the exact RPC error and a copy button replaces the
spinner.
- Renders one form-field per declared input. The flow
YAML's verbatim type tag drives the widget choice:
`bytes` / `file` → "Choose file…" button + picked-file
readout, plain TextField for everything else. The type
tag is shown next to the input name as a pill so a flow
author who picks a less-common type still gets a hint.
- Bytes inputs route through `file_picker` with
`withData: true`, which means the OS file dialog handles
read access — sandboxed Studio gets the bytes inline
rather than a path it can't open. Falls back to
`File(path).readAsBytes()` on Linux configs that don't
honour `withData` for large files; failures show a
copyable SnackBar.
- The Run button enables only when every declared input has
a value (text non-empty / file picked). Empty submission
is impossible; the cryptic hub-side
"missing value" error stops surfacing.
- The run-result dialog's error path uses `FaiErrorBox`
instead of the previous plain `SelectableText`, so any
hub-side flow error (permission denied, module crash,
whatever) is one click to clipboard.
11 new ARB keys cover the form's labels, the file-picker
states, the loading / failed-definition messages, the
"This flow declares no inputs" empty state, and the
run-error dialog title.
`file_picker: ^8.0.0` added to pubspec.yaml.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
