Bundles the error-UX overhaul and the inline log viewer:
- New `FaiLog` (`~/.fai/logs/studio-errors.log`, 256 KiB rotation,
JSON-per-line). Every operator-visible failure is appended so
`fai admin doctor` and the new viewer can show the trail
without the operator having to reproduce the failure.
- New `showFaiErrorSnack` / `showFaiErrorDialog` helpers wrap
`FaiErrorBox` in copyable surfaces; 27 ad-hoc
`SnackBar(content: Text(e.toString()))` sites swept to use
them (settings, doctor, audit, store, module sheet, system-AI
editor, flow output).
- New `FaiLogViewer` modal (`showFaiLogViewer`) renders log
files inline with line numbers, JSON-key + `[level]` token
colouring, Copy-all, Refresh, Open-externally. Doctor's
daemon-paths panel grows a "View" button next to "Open" for
every `.log` row and now also lists the Studio errors log.
- Today carousel: CTAs now actually re-run search after a
`filterCategory` / `runQuery` story is tapped (was only
flipping the chip state). Fallback story list bumped to 8.
- Editor bumped to git ref carrying 0.15.0 (type-token
colouring + analyzer diagnostics).
Studio bumped to 0.62.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Settings dialog's Theme Plugin section is now a grid of
swatched tiles:
- Built-in (none) — falls back to FaiTheme.light/.dark
- One tile per installed studio.theme.* plugin, each
showing the plugin's primary/secondary/tertiary as
live colour dots. Tile loads its preview lazily so a
dozen installed themes don't block the picker.
- Custom — opens a colour-picker dialog with 12 curated
Material presets + a hex input + live preview. Selecting
applies ColorScheme.fromSeed for both brightnesses.
main.dart's _pluginThemes parses a 'custom:#RRGGBB' sigil
in the same notifier slot as plugin capability ids, so the
existing persistence + restoration paths cover the custom
case with no new state.
Bumps editor to 0.11.0 (type-checked port connections +
dynamic card width fix + card-height border allowance) and
Studio to 0.58.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two operator surfaces shipped together:
**Multi-version uninstall picker** — when more than one version
of a `(provider, name)` is installed side-by-side, both the
module-sheet "Uninstall" affordance and the store-detail
"Uninstall" affordance now ask the operator which version to
remove before calling the RPC. The hub's wire-level support for
this (UninstallModuleRequest.version) was already there; Studio
just wasn't using it. Picker pre-selects the highest version so
single-version flows still take one click.
- `HubService.installedVersions(name)` enumerates the installed
versions via the capabilities list.
- `HubService.uninstallModule(name, version: ...)` forwards
the version into the RPC.
- `_UninstallVersionPickerDialog` (module sheet) and
`_StoreUninstallVersionPickerDialog` (store) host the
picker — separate widgets so each surface can evolve copy
independently. Uses `RadioGroup<String>` for Flutter
3.32+ deprecation compliance.
**Default scope editor** — new DEFAULT SCOPE panel in Settings
that calls the freshly-added HubAdmin RPCs
`GetDefaultScope` / `SetDefaultScope`. Operators can:
- reorder publisher segments with up/down buttons
(first match wins in the bare-form resolver),
- delete entries (hub still rejects empty list — Studio
surfaces the constraint inline),
- add arbitrary entries via the text field,
- add catalog-known publishers via suggestion chips
(sorted alphabetically, populated from the catalog).
Every change persists to `~/.fai/config.yaml` via the hub
and hot-swaps the in-memory copy without a daemon restart.
Bumped pubspec to 0.48.0. dart analyze clean (No issues
found!); flutter test green (11 tests).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio gains a new "HUB AUTHENTICATION" panel in Settings
mirroring the existing registry-credentials panel:
- `lib/data/hub_auth_token.dart` — `~/.fai/hub-auth-token`
helper (read / write / clear, mode 0600 on Unix). Sister
of `RegistryToken` with the same on-disk hygiene.
- `HubService.loadPersistedEndpoint` now reads the token at
startup and reconnects with it. `reconnect()` grew an
`authToken:` parameter with a sentinel that distinguishes
"keep current" from "drop". `reloadAuthToken()` is the
one-liner Settings calls after save / clear.
- `_HubAuthTokenPanel` in `fai_settings_dialog.dart` — paste
with show/hide toggle, save button, clear button, status
pill ("Configured (40 chars)" / "Not set (anonymous)"),
storage-location hint. Trimmed token length only — the
secret never round-trips back into the UI after save.
- EN + DE ARB entries (`hubAuthToken*`) + regenerated
`app_localizations.dart` keep the bilingual surface
consistent.
The hub side (auth.tokens config + tower middleware) shipped
on the platform side 2026-05-28 (43a54a2). Until now an
operator had no GUI path to consume it: they had to find the
file in their home dir, paste the token by hand, and bounce
Studio. This panel closes that loop.
Bumped pubspec to 0.47.0. dart analyze clean (No issues
found!); flutter test green (11 tests pass).
Block E item 1 of 4 done. Capability-picker badges,
default_scope editor, multi-version uninstall picker follow.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Dart SDK package was renamed package: fai_dart_sdk →
fai_client_sdk and the dir + Forgejo repo got a -dart language
suffix per the three SDK families convention in
fai/platform/docs/architecture/sdks.md. Updates the path
dep, dep name, every `package:fai_dart_sdk/...` import, and
the one comment that named the SDK.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two pieces of the Studio plugin host:
- `data/theme_plugin.dart`: discovery, persistence, ColorScheme
translation. Plugins listed via list_capabilities filtered
to studio.theme.*; selection persisted in SharedPreferences;
loadThemePluginSchemes builds a ColorScheme pair from the
plugin's 14 ARGB tokens per brightness.
- `main.dart`: StudioApp gains themePluginNotifier +
setThemePlugin(). MaterialApp wraps a FutureBuilder that
re-fetches the plugin's ColorSchemes whenever the
capability flips; falls back to FaiTheme.light/dark on
null or load failure.
- `fai_settings_dialog.dart`: new `_ThemePluginPanel` shows a
dropdown of installed studio.theme.* capabilities + a
"Built-in" entry. Switching applies immediately.
- HubService.invokePluginTranslate added as the typed wrapper
for the new gRPC RPC — ready for the FaiEnBadge swap-out
in the next iteration.
- 4 new l10n keys (themePluginHeader / None / Hint / Empty),
EN+DE.
flutter analyze + flutter test (widget + friendly_error): both
green. The integration test for the theme picker is the
existing fai_runtime plugin_theme + Studio-side
invokePluginTheme path that round-trips through the new
mirror-installable studio-theme-solarized bundle.
Signed-off-by: flemming-it <sf@flemming.it>
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Second half of the May-2026 trust pass. Drops the wall of
gRPC trailers from every error surface and makes the Store
honest about what is and isn't installable.
Friendly errors:
- New `friendlyError(Object, AppLocalizations)` mapper turns
GrpcError + arbitrary throwables into a localised headline,
optional recovery hint, and a verbatim detail string kept
behind a "Show details" expander. Duck-typed on `.code` /
`.message` so Studio doesn't have to depend on package:grpc
directly.
- `FaiErrorBox` gains an `error:` constructor that runs the
mapper. Every call site that used to render
`snap.error.toString()` (flows, welcome, store) switches to
it.
- 9 .arb entries per locale cover the gRPC codes we actually
emit (INVALID_ARGUMENT, NOT_FOUND, ALREADY_EXISTS,
PERMISSION_DENIED, FAILED_PRECONDITION, INTERNAL,
UNAVAILABLE, UNAUTHENTICATED) plus copy/details affordances.
- `test/friendly_error_test.dart` — 6 unit tests for the
mapper. Covers the mapping table, locale-switching, and the
non-gRPC fallback so future regressions show up in CI.
Capability discovery:
- New `HubService.allCapabilities()` reads the kind-aware
capability list (wasm + builtin + federated) and returns a
Dart-side `CapabilityInfo` value type. The flow page's
missing-dependency check uses it so `system.approval` and
federated MCP/n8n tools count as "available" — fixes the
Run button staying disabled forever.
- `HubService.listModules()` filters to kind=wasm so the
Modules page doesn't sprout synthetic "system" entries that
the operator can't uninstall.
Store clarity:
- New "Installable only" filter, on by default. Roughly 2/3
of seed entries currently carry `status: planned`; the
default view stops being noise.
- Featured-strip cards for planned modules now show a
"Coming soon" pill instead of an empty action area.
- Main-grid cards for non-installable modules dim to 60%
opacity so the eye lands on actionable cards first.
- Detail-sheet "Nicht installierbar" tooltip → inline hint
box. The reason is visible without hovering.
MCP localisation:
- `_kMcpSuggestions` no longer holds 11 hardcoded English
description strings. The `description` field is replaced
with a `resolveDescription(AppLocalizations)` lookup that
switches on the suggestion `name` to read the matching
`mcpSuggestion*Desc` .arb key. EN + DE shipped.
- New `FaiEnBadge` widget renders a small `[EN]` pill when
the active locale isn't English. Used next to MCP /
federated store entries' tagline + description because
the server supplies them in English and we can't translate
on the fly yet — the badge is the honest signal until the
planned `studio.translate` plugin lands.
Plus housekeeping: removed the unused `_keepImport` lint
escape in the test and the dangling library doc-comment in
`format.dart`.
Signed-off-by: flemming-it <sf@flemming.it>
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
UI parity with the platform CLI: `fai reset` (v0.10.93) is now
reachable from Settings. The panel shows the reset blurb plus
two checkboxes mirroring the CLI flags (Keep modules / Keep
audit log + saved flows), then a destructive-styled "Reset hub
state" button. Click goes through a confirm dialog before
SystemActions.faiReset is invoked.
After the CLI returns, Studio bounces its gRPC channel against
the same endpoint (the daemon restarts on the same channel +
port, so no Settings change needed) and reloads every panel:
channel status, system AI, MCP clients, n8n endpoints, registry
token. Output (success or failure) is shown in a copyable error
box so any unexpected stderr lands somewhere the operator can
paste from.
Sits at the bottom of the dialog under "HUB MAINTENANCE",
separated from the everyday config so a destructive button
doesn't crowd the day-to-day controls.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The hub install path now reads `~/.fai/registry-token` as a
fallback when `FAI_REGISTRY_TOKEN` is unset (platform v0.10.92).
Studio now writes that file directly: a fresh operator pastes
the PAT into Settings → Registry credentials, hits Save, and
the next install attempt resolves the auth wall without any
shell or env-var setup.
The token never round-trips back into Studio after save —
status is shown only as "Configured (40 chars)" / "Not set"
with no display of the secret itself. The Clear action deletes
the file. On Unix the file is chmod-ed to 0600 (owner-only
read/write); Windows leaves the default user ACL in place.
Storage is strictly local: `~/.fai/registry-token`, never sent
to a remote service. The hint text under the field says so to
make the data flow explicit.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three concrete changes against operator feedback that the
Today carousel was visually jumping when arrowed and
genre-mixing platform-architecture education with store-
actionable highlights.
- Carousel size pinned. The hero's outer Container picks up
`BoxConstraints(minHeight: 240)` so a slide with one
paragraph and a slide with three render at the same
height. Prev/next no longer reflows the rest of the page.
- Today fallback stories trimmed and re-themed. The four
shipped slides drop to three:
- "Public sources" (DeepWiki / Semgrep one-click) — kept
- "Three text modules already in the store" — new,
points the operator at text.extract / text.summarize /
text.translate in the grid below
- "Try the extract → summarize flow" — new, points at
flows/extract-summarize.yaml
Architecture-education stories (sandbox model, hash-
chained audit, air-gap posture) are gone from this surface
— they belong on the Welcome page that
`docs/landing-page-design.md` lays out.
- DeepWiki + Semgrep added to the Settings → MCP-Clients
add-server suggestion-chip catalogue. Until now the chips
were nine stdio servers that need Node + npx; the two
HTTPS public sources only existed as one-click cards in
the Today hero. Operators who dismissed the hero had no
in-Settings path to find them. The new entries sit at the
top of the catalogue with an explicit "Public HTTPS — no
Node, no API key" descriptor and the same icons the Today
hero already uses.
- `docs/landing-page-design.md` (new). Captures the design
for a sidebar Welcome page that hosts the three-pillar
intro, the trust-posture deck, the getting-started
checklist, and an embedded-doc reader so operator-facing
documentation stays inside Studio (`flutter_markdown`
rendering of bundled `assets/docs/*.md`) instead of
clicking out to a browser. Three-phase implementation
plan: scaffolding, embedded docs, computed checklist.
Build is gated on operator alignment; this doc is the
alignment artefact.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Sweeping pass against six user reports collected this session.
1. "Capabilities ist nicht deutsch, Chain auch nicht."
The DE locale still leaked English vocabulary. Replaced
"Capabilities" → "Fähigkeiten" and "Chain" / "Hash-Chain"
→ "Kette" / "Hash-Kette" everywhere — store search hint,
recommended-source body, federated toast, doctor summary
chain row, modules panel summary, MCP / n8n hints, the
approvals history blurb. Wire-level identifiers
(`chain.reset`) stay as code.
2. "Bei Fehlern unten muss man die auch ins clipboard
kopieren können." New `FaiErrorBox` widget: selectable
monospace block with a small copy-to-clipboard icon
button that flips to a checkmark for two seconds after
click. Applied to the Doctor update banner output and
the Settings channel toast — the two places long
stderr / stdout lands.
3. "Öffnen bei Log kann es nicht öffnen. Audit-DB auch
nicht. PID auch nicht."
Cause: `SystemActions.openInOs` shells out to `open` /
`xdg-open` on file paths the OS has no default handler
for (SQLite DB, PID file, log without an .ext that
binds). New `revealInOs` uses `open -R` on macOS,
`explorer /select,` on Windows, and the parent
directory via `xdg-open` on Linux. Doctor's path rows
carry an `isDirectory` flag that routes through the new
`openOrReveal` so files reveal in Finder / Explorer
instead of failing silently.
4. "Oben im Store könnte man diesen Redaktionshinweis auch
so bauen, dass man mit pfeil nach rechts links auch
weitere anzeigen kann."
The Today-Hero became a carousel. Curated fallback
list grew from one entry to four (public sources, the
sandbox-by-default permission story, the hash-chained
audit story, the air-gap-ready single-binary pitch).
Hero gets prev / next chevrons plus a dot indicator
when the current snapshot has more than one slide.
Operator-accepted stories stay single — the carousel
collapses when there's only one to show.
5. "Ich fände es schöner wenn rechts und links im Store
die Abstände konsistent sind, das Reload-Symbol rechts
ist zu weit rechts und Store links auch nicht bündig."
AppBar now has `titleSpacing: FaiSpace.xl` so the
title's left edge sits flush with the body's left
padding (24 dp), and the trailing `SizedBox` after the
reload icon shrunk so the icon's outer edge meets the
right edge of the rightmost grid card.
6. "Oben der Titel zeigt fai_studio an, das sollte F∆I
Studio sein." The OS window title was the
pubspec-derived "fai_studio". Macos/Linux/Windows
runners now hard-code "F∆I Studio" (with the U+2206
triangle escape so the C++ source stays ASCII). macOS
bundle name and display name lifted out of the
PRODUCT_NAME variable for the same reason.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Mirror of the MCP-clients panel: Add / Remove / Refresh
with last-discovery health (workflow count or error_kind),
sister Add-dialog with name + base_url + optional
api_key_env + notes. HubService gains the four passthroughs
(`listN8nEndpoints`, `refreshN8nEndpoints`,
`addN8nEndpoint`, `removeN8nEndpoint`) and a
`N8nEndpointInfo` data class.
Settings dialog now hosts: hub endpoint, channels,
system AI, MCP clients, n8n endpoints — all behind the
existing 520×640 SingleChildScrollView so the layout
doesn't crowd.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The viral-bridge story now has a UI surface. Settings →
MCP Clients lists every configured server, shows last-
discovery health (green dot + tool count, red dot + error
kind), and offers Add / Remove / Refresh.
Add-server dialog: name (no dots), endpoint, optional
api_key_env, optional notes. On submit the hub persists +
re-runs discovery in one round-trip; the Store fills with
synthetic `mcp.<name>.<tool>` entries the operator can see
immediately.
StoreItem now carries `kind` and `provider`. Federated
entries route through a bridge — no install bundle to
download — and Studio's install button renders accordingly
(via the existing "Not installable" path; the Phase-2
follow-up adds an explicit "Configure bridge" call-to-action).
Settings dialog grew to 520×640 with a SingleChildScrollView
so the additional panels don't crowd. Channel pill, system-AI
panel, MCP-clients panel all coexist without a redesign.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
UI parity for operators who never touch a CLI, plus a Store
that reads more like an app store.
Settings dialog:
- Channel rows gain a popup menu: Connect / Make active /
Enable autostart / Disable autostart. "Connect" still
re-points Studio's wire; "Make active" actually writes
~/.fai/current-channel via `fai channel switch`.
- Inline output panel surfaces the spawned binary's stdout
on success or stderr on failure, so operators see what
happened without opening a terminal.
Store page rewrite:
- Big top search bar with a clear button. Live filter on
every keystroke.
- Horizontal category strip auto-populated from the index;
segmented status row (All / Published / Alpha / Planned),
Installed-only chip, result count.
- Grid of cards that reflows to fit the viewport — replaces
the previous single-column list. Each card shows
category-aware icon, version, status, tagline preview, and
a one-click Install (or Details for installed / planned).
- Per-module detail sheet renders the full bilingual
description with a DE/EN toggle, separate Required-
capabilities + Required-host-services sections, repo link,
Read-docs button. Install + Uninstall live at the bottom.
- StoreItem and HubService.searchStore now carry the German
tagline + description so the locale toggle has something
to switch to.
SystemActions extended with `faiChannelSwitch`,
`faiDaemonEnable`, `faiDaemonDisable` so Settings can spawn
the right CLI without each call site reimplementing the
`fai` resolution rules.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Replaces the read-only System AI block in Settings with a real
editor. Operator never has to touch ~/.fai/config.yaml again
to change provider, endpoint, model, API-key env-var, or
privacy mode.
UX choices that align with the zero-learning-curve rule:
* Provider dropdown lists Ollama / OpenAI / LM Studio / vLLM
/ Custom by friendly name. Each selection auto-fills the
endpoint and api_key_env defaults — but only when the
field is still empty or matches a different preset's
default, so manual overrides are never clobbered.
* Each provider has a one-line description rendered under
the dropdown ("Ollama → Local `ollama serve`. Models stay
on your machine. No API key needed.") and a model-hint
placeholder ("gemma3:4b · llama3.2:3b · qwen2.5-coder:7b")
that goes away when a model is typed.
* Privacy mode is a vertical radio group with each option's
description in place — no doc-lookup needed.
* "Test connection" sends an `ok`-ping and renders the
same error-kind → fix-hint mapping the audit drill-down
uses.
* "Save" persists + hot-reloads the hub. No daemon restart
required. UI status badge flips to "enabled · <privacy>"
immediately.
`fai_dart_sdk` 0.5.0 carries the underlying `updateSystemAi` /
`testSystemAi` RPCs.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two new operator affordances powered by `HubAdmin.AskAi`:
* **Audit drill-down → "Explain" button.** Tappable on every
failed event when System AI is configured; greyed out with
a "Configure in Settings" tooltip otherwise. Shows an
inline panel under the event fields with the LLM's plain-
language explanation, a "FIX" suggestion, the privacy-mode
badge (`redacted` / `full`), and round-trip latency. Errors
map to actionable fix hints (`env_missing` → "set $VAR in
your shell, then fai daemon restart"; `network` → "is your
provider running?"; etc.) — no raw HTTP errors surfaced.
* **Settings dialog → System AI panel.** Renders the live
HubAdmin.SystemAiStatus (provider, endpoint, model,
api_key_env name, privacy mode). When disabled, shows a
one-line explainer + pointer to docs/architecture/system-ai.md.
Read-only for now; editing the config still requires
~/.fai/config.yaml (Phase-1+ adds in-place editing).
Both surfaces follow the new zero-learning-curve UX rule:
the user never has to look up what the configurable means or
how to fix an error — every state self-explains in place.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Turns Studio from read-only dashboard into operator console.
Pieces:
* **New Store page** (sidebar destination #3): browses the
hub's bundled store-index with query + category + status
filters. Each card has an Install button that prompts for
the `.fai` bundle source (URL or local path), ships it to
HubAdmin.InstallModule, shows success / error in a progress
dialog, refreshes the list.
* **Audit drill-down**: every event row is now tappable;
opens a modal with all LoggedEvent fields including the
new `detail` JSON pretty-printed in a code block. KRITIS
forensic story: every audit row → full structured detail
in two clicks.
* **Approvals payload preview**: shipped already; now
pretty-prints JSON when the preview parses as such, plus
a clearer `PAYLOAD PREVIEW` label. Reviewer identity
defaults to `$USER@studio` instead of the hard-coded
`studio-mvp` so the audit trail records who acted.
* **Channel switcher in Settings dialog**: the dialog now
pulls HubAdmin.ChannelStatus and renders one row per
channel (local / dev / beta / production) with port,
running indicator, active marker. A "Connect" button
on a running channel sets Studio's endpoint to that
channel's port and reconnects in one click.
Cmd+1..6 keyboard shortcuts updated for the six destinations.
Widget test asserts every destination renders.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio is no longer hardcoded to localhost:50051. A gear icon
in the sidebar footer opens a small settings dialog where the
operator picks host / port / TLS-on-or-off. Saved values
persist via shared_preferences and Studio reconnects to the
new endpoint immediately.
- data/hub.dart: HubService.loadPersistedEndpoint() called once
before the first frame; reconnect() persists on every change.
- widgets/fai_settings_dialog.dart: typed form with port range
validation, live URL preview pill, error surfacing if the
reconnect fails.
- main.dart: gear icon at the sidebar bottom, replaces the
static "platform v0.10.42" footer.
shared_preferences added as dependency. flutter analyze clean,
flutter test 2/2, macOS debug build succeeds.
Bumps fai_studio 0.4.0 -> 0.5.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
