The wizard's first step now offers 'or just describe what you want
to do': the goal goes to the configured system AI, which maps it
onto the menu answers (validated against strict enum whitelists —
a hallucinated value can never reach the engine). The suggestion
comes back as an editable plain-language reflection ('this is how I
read your task') the operator can adjust step-by-step or take to
the same preview/apply the menu path uses. Trust rules per
guided-setup.md: suggestion only (never auto-apply), a privacy line
states whether the description is processed locally or sent to a
provider, and without a configured system AI the section explains
that the menu always works — no dead end.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Post-apply the wizard now renders real Studio actions instead of CLI
text: a start-hub button that polls until the daemon answers,
per-module install buttons (capability-name install via the hub's
store index) with done/progress states, and an open-the-starter-flow
button that navigates to the Flows page. Regulated plans explain in
plain language that modules come from a signed source; the preview
offers 'allow installing from the public store' as one deliberate,
reversible switch that re-assembles the plan (allow_unsigned_modules).
Fresh installs (no config, no setup-plan.yaml) auto-open the wizard
once per run — the wizard IS the onboarding — and it steps back once
a setup exists. The welcome CTA is framed honestly ('get started in
3 questions'), and after the wizard closes the onboarding checklist
remounts, re-probes, and says what the assistant already covered
(profile line from setup-plan.yaml) instead of acting as a second,
disconnected onboarding surface.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Reworks the Setup-Assistent toward the zero-learning-curve bar
(docs/architecture/guided-setup.md, phase 1.1):
- Every scenario/intent/target choice is now a localized option CARD
with a one-line plain-language explanation of what it configures
(DE+EN, Sie-form) — replacing the bare dropdowns whose labels were
English enum humanizations ('Regulated Production', 'This Laptop').
- Three explained steps with a 'Schritt n von 3' progress line
(stakes → task → environment); the two adaptive toggles move to the
last step in plain language (no 'air-gapped' jargon).
- The review step renders a localized PLAIN-LANGUAGE summary built
from 'chain init --answers --plan-json' (the structured SetupPlan) —
'Ch∆In richtet einen regulierten Betrieb ein: signierte Module
verlangt · … · geändert wird nur ~/.chain/config.yaml' — instead of
echoing the CLI's English prose. Warns when an existing config will
be overwritten. After apply: a plain 'Fertig' + next steps.
flutter analyze clean; widget tests for the step flow + German option
labels. Remaining per plan: clickable follow-up actions, signature
dead-end fix, placement/auto-open, and the LLM free-text path.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The workspace switcher now lists the operator's sealed areas (read from
~/.chain/sealed/ manifests, the same source the CLI uses) below the
shared projects, each with a lock icon and a running/stopped status.
Selecting one is a real connection switch: Studio reconnects its hub
client to the area's own port with a full state reload — one window,
one truth. A stopped area is started first (chain project start) with a
visible notice; a failure surfaces as a copyable error and rolls back to
the shared hub.
While in a sealed area an identity bar under the AppBar is painted in
the area's accent colour and names it, with a one-click Leave back to
the shared hub. The area colour is marking, not theming — Studio's blue
stays the app accent. Selecting a shared project from inside an area
switches the connection back first. The sealed connection is never
persisted across restarts.
New: SealedAreaService (manifest + PID discovery), Workspace sealed
switch logic, ChainSealedIdentityBar, SystemActions.chainProjectStart.
l10n DE+EN. flutter analyze clean; 33 tests green (switcher lists sealed
with lock+status, pill shows active area, identity bar renders in the
area colour). Runtime plumbing (discovery, start, endpoint, reach)
verified headlessly against real sealed instances under a redirected
HOME; the identity-bar screenshot is deferred (display click-automation
failed after sleep on the shared desktop — an environment issue, not a
code gap; the visible components are widget-tested).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
New Runs sidebar destination listing detached invocations (detach:true)
with phase, current step, project and a Cancel button while
pending/running. Workspace-scoped like Audit/Approvals, polls every 2s.
Detached runs are opt-in (detached.enabled) — the empty state explains
how to enable them. Inline help doc DE+EN. DetachedRun model +
listDetachedRuns/cancelDetachedRun in HubService, backed by the SDK's
listInvocations()/cancelInvocation(). flutter analyze clean; 29 tests
green (sidebar Y-stability updated for the new destination, model
mapping unit-tested).
Screenshot verification (light+dark) deferred — shared desktop in use.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
FlowsPage passes the active workspace to the editor and switches the
workspace when the operator accepts a file-wins mismatch. Rebuilds the
chip live on workspace change. Editor package bumped to 0.22.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Multi-project stage 1 against the shared hub (platform design
docs/architecture/projects.md, § Studio):
- ChainWorkspaceSwitcher in the Audit + Approvals AppBars: lists the
registry (colour dot per project, shield for protected, honesty
tooltip), 'All projects' stays reachable — a filter, not a jail.
Selection is persisted and shared via the Workspace notifier.
- Audit page: list query AND live stream re-scoped hub-side on switch.
- Approvals page: pending + history scoped; the sidebar badge counts
the active workspace's pending approvals.
- Flow runs are stamped with the active workspace; a flow file
carrying its own project: keeps it (file wins, CLI semantics).
- Data layer: listProjects/ProjectRef; project fields on AuditEvent,
PendingApproval(+Record), SavedFlow; project params through
HubService. l10n DE+EN. Widget tests for the switcher contract.
Visual verification (light+dark screenshots) still pending — the
shared desktop was in active use; code paths are covered by
flutter test (26 green).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- approvals: empty/legacy hub prompts render the localized fallback;
approving without show: data asks for conscious confirmation first
- chain_log: write to ~/.chain/logs/studio-errors.log (was .fai),
one-time best-effort migration of the legacy file + rotation sibling
- l10n: 'manipulationssicher' -> 'manipulationserkennend', neutral
WORM-1 blurb, doctor pill 'Integritätskette v1', federation hint
says the CA authenticates the first connect (DE+EN)
- theme: muted text token now >=4.5:1 on canvas, cards and elevated
dark surfaces (was 3.7:1 on cards)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The grouped store showed the hub's English category labels verbatim
(Documents, Data & Formats) even in German. Map the canonical slug to
DE/EN via l10n (storeCat*), and localize the Modules/Studio segment
(storeSegment*). Falls back to the hub label for an unknown slug.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The store grid was a flat jumble. It now renders labelled sections per
canonical category (App-Store style, fixed order, with counts), and a
top 'Modules | Studio & Themes' segment splits flow modules from Studio
plugins/themes. StoreItem carries the hub's canonical_category(+label);
falls back to the raw category label for a pre-0.21 hub.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The welcome hero subtitle described Ch∆In as 'AI-assisted document
processing' / 'KI-gestützte Dokumentenverarbeitung' — too narrow. The
canonical product line is 'AI-assisted data processing' (flows also
handle streams and general data, not only documents). Fixed in both
locales (arb + generated app_localizations).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The guided setup is the fastest path to a working first run, so lead
with a FilledButton instead of a low-emphasis outlined one (welcome
page). Delete pages/modules.dart — ModulesPage was never routed
(superseded by the Store 'Installed' filter) and nothing imports it;
flutter analyze stays clean.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Opening the channel switcher let the hover-exit collapse the rail at the
same moment, leaving the menu floating at the pill's old (expanded)
position. The pill now signals open/close; the sidebar suppresses its
collapse (_menuOpen) while the menu is up, so it stays aligned.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
StoreItem gains source (mapped from StoreEntry.source); the store grid
shows a 'from <store>' label for operator-added stores (bundled seed
unlabelled). Foundation for grouping by store. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The grid cell rendered a bare category glyph in a CircleAvatar; the detail
view uses _ModuleIcon (module icon URL with category fallback). Grid now
uses _ModuleIcon too — consistent, aligned, shows per-module icons.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
friendlyError now pattern-matches module-download failures ('download
failed: ...') and renders a clear, copyable headline + the URL/status
detail, instead of letting the gRPC-Unavailable default show the generic
'hub not reachable' banner. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A Welcome 'Setup assistant' button opens a wizard that collects
scenario / intent / target (+ approval & data-local toggles), then calls
`chain init --answers` to preview the assembled plan and `--apply --force`
to write the config — reusing the Rust deterministic engine, no logic
duplicated. New SystemActions.chainInit; copyable errors via
showFaiProcessError; EN+DE l10n. analyze clean; smoke test + existing
welcome/sidebar tests pass.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Adds a widget test asserting each destination icon keeps its Y position
whether the rail is collapsed or expanded — a recurring regression. To
drive expansion without a hover gesture (which trips RenderFlex overflow
mid-transition), a test-only startSidebarExpanded flag threads
StudioApp -> StudioShell -> _Sidebar (controller starts at 1.0, hover
disabled); _SidebarItems get stable ValueKeys. analyze clean; new test
and the existing smoke test pass.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio's Start-hub looked for 'fai' on PATH; post-rename the entry
binary is 'chain', so a fresh install failed to start the daemon.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Audit page subscribes to streamEvents and nudges an immediate
(debounced) refresh on each new event, so the feed updates instantly
instead of waiting up to 2 s. Reuses the proven _refresh() path, so
list management + filtering + hash-chain ordering are unchanged. The
2 s poll remains the safety net: on a persistent stream error the page
is still fresh within the interval; a clean stream close re-subscribes
once after 3 s. Subscription + debounce cancelled on dispose.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The module-store manager's 'Add a store' form gains an optional PEM
public-key field; when set it pins that publisher key to the store
(per-store signing trust). Localized DE/EN.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The collapsed connection dot was a static Container after the sidebar
refactor; route it through the shared ChainStatusDot with pulsing tied
to the connected state — a living live-signal, steady when down or
unknown.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The approval card only rendered the payload section when a preview
existed, so a step with no 'show:' showed nothing and the reviewer
could not tell why. Now always show the section: a present payload
scrolls inside a height-capped, copyable box; an absent one shows an
explanatory hint (the flow's approval step chooses what to surface via
its 'show:' field). Relabel 'data to be released' -> 'data to review'
(the payload is review context, accurate to its source).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Audit sweep after the System-AI fix: the Settings dialog rendered its
two _error states as a bare Text (hub-endpoint save, default-scope
edit), and the Audit live-status bar showed the raw load failure in a
non-selectable Text (the only place that failure surfaces — the
empty-state below shows just a generic hint). Route the Settings errors
through ChainErrorBox and make the Audit disconnected text a
SelectableText. Errors must always be clipboard-copyable.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The System-AI editor rendered its failure (test connection, save, model
pull) as a bare Text(_error) — selectable-but-not-copyable, the exact
thing the operator needs to paste back. Route it through ChainErrorBox
(selectable + one-tap copy button), and show a failed test result via
ChainErrorBox too instead of a plain SelectableText.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Use the raw store-index file in the public chain-modules/reclaim repo
(git.flemming.ai/chain-modules/reclaim/raw/branch/main/store.yaml) —
stable, no release-tag churn, fetched by the hub's StoreIndex::from_url.
The availability probe flips the row to 'Add' automatically once reclaim
publishes the file.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- store: repair the filter dialog crash (a Spacer lived directly in
AlertDialog.actions, which is an OverflowBar, not a Flex — it threw
and rendered a broken dialog). Buttons now sit in a Row.
- store: promote the module-store manager from a bare icon to a
labelled 'Add store' button, and fully localize the dialog (DE/EN).
- store: add a curated 'Suggested stores' shelf with one-click
add/remove (first entry: Recl∆Im). Each suggestion is probed for
reachability and shows 'not available yet' until its index is
published, instead of failing only on click. Fail-open on network
errors so a transient hiccup never hides a real store.
- sidebar: the channel pill is now a one-click channel switcher
(menu with per-channel running state + active check; switching
writes ~/.chain/current-channel, restarts the daemon, and Studio
repoints to the new channel).
- approvals: lead the card with the human prompt ('what am I
releasing?') and demote the flow/step id to a metadata line; clear
fallback when the step left the prompt empty.
- welcome: tidy the docs grid into equal-height paired rows with a
full-width trailing card for the odd one out.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
'Tap to start' on an already-running hub reported 'daemon could not be
started' (the start failed because it was already up) then flashed the
error away as a SnackBar — confusing next to the sidebar's 'connected'.
Now: on a failed start, probe the hub; if it answers, just connect (no
false error). If it is genuinely down, show the daemon's stderr in a
persistent, copyable dialog (showFaiProcessErrorDialog) instead of a
SnackBar that vanishes before the operator can read or copy it.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A store icon in the Store app bar opens a dialog that lists the
configured module stores + the bundled seed (with per-source module
counts), lets the operator add a store by index URL (the hub fetches +
merges it live so its modules appear immediately), and remove a store.
Backed by the new ListStores/AddStore/RemoveStore RPCs + SDK methods.
This is how a domain app's published modules (e.g. reclaim's) become
visible in the Store without touching the CLI.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio defaulted its endpoint to the local channel's port (:50051), but
a curl|sh user is on the production channel (:50071) — so the sidebar
probed a different daemon than the Diagnose page reported, showing
'connected' next to 'production daemon stopped'. On first run Studio now
reads ~/.chain/current-channel (+ run/<ch>.endpoint) and follows the
active channel; an explicit Settings endpoint still wins and persists,
auto-discovery does not (re-follows the channel each launch). The
connection caption now names the channel ('Connected · production') so
it can never look contradictory again.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
From a live-test audit:
- Install via the flow-editor 'Fix' sent 'debug.echo@^0' (version
constraint included) as the install source; the hub resolves by bare
name so it missed ('no store entry for debug.echo@^0'). Strip the
@<constraint> like the Store page does — debug.echo now installs.
- Errors the operator could not copy: route the daemon-start failure
(its stderr!), the flow-editor install failure and the federation
issue failure through showFaiErrorSnack / a new showFaiProcessError
helper, so every error is selectable, one-tap copyable and logged.
- Diagnose page opened slowly because doctor() Future.wait-ed on a live
manifest fetch (8s server timeout); cap that one check at 2s so the
page no longer waits on the network.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The active-channel pill coloured 'production' with the theme error
colour — red read as 'something is broken'. Use ChainColors.success
(live & healthy) instead; still visibly distinct from beta (amber),
dev (accent) and local (grey).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Studio design system, widgets and helpers carried a Fai* / fai_
prefix (FaiSpace, FaiColors, FaiTheme, FaiLog, 17 fai_*.dart files, the
faiBinary* l10n keys). Studio is the Ch∆In product, so rename them to
Chain* / chain_ — carefully preserving English fail/failure/failed.
Also fix stale references: the 'fai' binary in l10n strings -> 'chain',
FAI_* env vars (FAI_BIN/DATA_DIR/MODULES_DIR/TODAY/BOOTSTRAP_TOKEN) ->
CHAIN_*, fai_platform -> fai_chain, fai_hub -> chain_hub. Vendor
security-hook tooling (FAI_BANNED_TERMS_FILE) + the .fai bundle ext left.
flutter analyze + test: clean (20 passed).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio is the Ch∆In product's GUI, not a F∆I-vendor app. Rename the
Flutter package, all package: imports, and the build identity across
platforms: linux/windows CMake BINARY_NAME + project, Windows Runner.rc
fields, macOS PRODUCT_NAME / bundle id (ai.flemming.chain.chainStudio) /
.app + scheme BuildableName. Update the client-SDK + flow-editor deps to
their renamed chain_* packages (path + git URL). Company/copyright fields
now read Flemming.AI. flutter analyze: clean.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Track the platform rename: the hub spawn path is now ~/.chain/bin/chain
(was ~/.fai/bin/fai.exe on Windows — both dir and binary were stale, so
Studio could not launch the hub after the config-dir rename), the
~/.fai/* help strings become ~/.chain/*, FAI_REGISTRY_TOKEN ->
CHAIN_REGISTRY_TOKEN, and the two in-app doc URLs point at the public
fai/chain repo (fai/platform was renamed to the private fai/chain-private).
The .fai module bundle extension is left unchanged (format phase).
flutter analyze: no issues.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Studio follows the platform rename: product branding F∆I -> Ch∆In in UI
strings, command examples fai -> chain, and — critically — the spawned
hub binary path ~/.fai/bin/fai -> ~/.fai/bin/chain so Studio launches
the renamed binary. The fai_* Dart identifiers (FaiLog, widget files,
the generated SDK) stay = vendor/internal namespace. flutter analyze:
no issues.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The doc'd first install is debug.echo, but the Welcome onboarding
checklist only went green for a text.* capability — so a user
following the quickstart saw the box stay unchecked. Match any
non-system (non-built-in) capability instead.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A new 'Föderation' destination (primary side) lists connected
satellites — name, region, version, wire version, advertised
capabilities — and adds them in one step: 'Add satellite' issues a
single-use bootstrap token bundled with the primary CA as a
ready-to-paste satellite config (the bundled CA makes the first
connect tamper-proof). Localized EN + DE, in-app help doc. Uses the
new HubService.listSatellites / issueSatelliteToken wrapping the
SDK's federation methods.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Strip ANSI / control characters when reading log files so daemon
logs that carry colour escape codes render clean instead of as
garbled special characters (the source side is fixed in the hub
too; this is the defensive belt for existing files).
- Generalise the file viewer (read top-down + plain mode) and add an
in-Studio "View" affordance for config.yaml / .yml / .toml on the
Doctor paths panel, so config is readable without leaving Studio.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Brightness-aware elevation tokens (FaiElevation low/medium) applied
to cards, sheets and the sidebar active item; gentle hover-lift on
Store + Doc cards; a longer, eased sidebar expand using the
under-used FaiMotion.slow; and a branded empty state carrying the
F∆I delta mark with warmer spacing. Subtle, Linear/Raycast-style —
both light and dark themes tuned.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Connection-aware Welcome: when the hub is down, show a hero with a
primary "Start hub" CTA + install fallback instead of a dead,
all-unchecked onboarding checklist (the first-run cliff).
- Actionable binary-not-found (file picker + install link, not a
"set FAI_BIN" dead end) and a connect-failure banner after
repeated failed health polls.
- Localize six hardcoded English error/toast clusters (DE+EN ARB).
- Bundle Inter + JetBrains Mono as assets; drop the runtime
google_fonts fetch (air-gap / KRITIS safe, no font-swap flash).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Two operator-attention improvements:
- The sidebar's Approvals item gains a small accent-coloured
badge (e.g. '2', '9+') when there are pending approvals,
polled on the same 5 s tick the health check uses. Operators
no longer need to open the Approvals page to discover new
pending decisions; the badge surfaces them at the rail
level.
- The Settings dialog's per-category panel titles grow an
optional help icon (?) that opens the matching bundled
docs explainer via showFaiDoc. Wired for General →
architecture, Security → security, Maintenance → audit.
Other categories deliberately stay un-iced for now —
Appearance / System AI / Integrations don't yet have a
standalone bundled doc, and showing a broken help icon
would be worse than showing none.
Studio bumped to 0.69.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
When operators open a module's detail sheet from the Store,
the Permissions section now grows a small help icon next to
the section header. Tapping it opens the bundled security.md
explainer in the existing bottom-sheet reader, the same
in-app help system Approvals + Audit + Doctor already use.
Closes the zero-learning-curve gap: every operator-facing
declaration of permissions ('net: api.openai.com', 'fs.read:
…') now has a clickable affordance to learn what those
permission categories mean and how the sandbox enforces them.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
StudioFlowRunDriver gains three new methods that satisfy the
editor 0.21.0 FlowRunDriver interface:
- pendingApprovalIdForStep(flowName, stepId) — picks the
newest pending approval row matching this (flow, step)
pair from HubService.pendingApprovals().
- approveApproval(approvalId, reviewer) — delegates to
HubService.approve, same RPC the Approvals page uses.
- rejectApproval(approvalId, reviewer, reason) — delegates
to HubService.reject.
End result: when a flow run pauses on system.approval@^0,
the Run tab now renders a complete Approve / Reject form
directly under the awaiting step. Operator no longer needs
to switch tabs to make the decision; the standalone Approvals
page stays available for non-running approvals and history.
Studio bumped to 0.68.0; editor pin moves to 0.21.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Generic gRPC-code mapping was right but not specific enough.
A flow failing with an approval-timeout used to land on
'Deadline exceeded — try again later'; now it reads 'Freigabe-
Timeout abgelaufen — entweder timeout_seconds erhöhen oder
den Reviewer informieren.'
New pattern matchers in _matchHubPattern, runs before the
gRPC-code switch. Six FlowExecutionError shapes covered:
- approval rejected ("rejected by")
- approval timeout
- output too large ("exceeding the X MB cap")
- host service not declared
- missing value reference
- MCP endpoint unreachable
- capability not installed (NotFound fallback)
Every match comes with a localised hint pointing at the
concrete fix path (audit log / timeout config / Integrations
panel / Text-tab Fix button).
Five new tests pin the matchers — would catch a silent
regression when the hub renames a variant Display string.
All 11 friendly_error tests + 19 Studio tests green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three operator-UX gaps closed:
- Settings dialog's six-category sidebar (General / Appearance /
System AI / Integrations / Security / Maintenance) was
hardcoded English; now flows through AppLocalizations
("Allgemein" / "Darstellung" / "System-KI" / "Integrationen" /
"Sicherheit" / "Wartung"). Same for the per-panel title +
description.
- Per-channel daemon-action labels ('enable autostart' /
'disable autostart' / 'daemon restart' etc.) and the
OK / Failed result line in the toast also moved to l10n,
so the system-action feedback reads as one language.
- New 'Approvals' doc bundle (en + de) under assets/docs/,
registered as a fifth doc card on Welcome plus exposed via
the new public helper. The
Approvals, Audit and Doctor app-bars grow a Help icon button
next to Refresh that opens the matching doc in the existing
bottom-sheet reader — no extra screen, no learning curve.
Studio bumped to 0.67.0; editor path-override pulls in 0.20.1
(flow-list row polish).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The previous Add-source dialog was English-only and
operator-hostile — answered 'where do I install from?' without
explaining what a private module *is*. New version, DE + EN:
- Title + intro + button labels routed through AppLocalizations
("Modul-Quelle hinzufügen" / "Installation fehlgeschlagen"
instead of raw English strings).
- 'How private modules work' explainer block (3 sentences):
what a module is (`module.yaml` + WASM), how to package
it (`fai pack <dir>` → .fai bundle), where to host it
(any URL: own Forgejo / GitHub / S3), what verification the
hub does (sha256 + signature against trust store).
- Honest about the Studio gap: the dialog can install URLs +
packed bundles, but unpacked source directories still
require `fai install --link <path>` on the CLI. The
example command lives in its own code-style box, selectable.
- Layout: SingleChildScrollView'd so the explainer doesn't
push the buttons off short viewports.
Studio bumped to 0.66.0; editor path-override pulls in 0.20.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Pulls in editor 0.19.0 which closes three operator-reported
gaps: persistent diagnostic strip across all three tabs,
analyzer-error block on Run, and copyable run failures.
Studio bumped to 0.65.1.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
