Approvals: the pending card now shows its full origin — flow, step,
run id (previously dropped at the Dart mapping layer), project, and
requested-at — under an ORIGIN heading, led by a one-line intro strip
that says what the inbox is and what Approve/Reject do. Approve/Reject
buttons carry tooltips; the history dialog gains project + run id.
Fixes the approvals doc drift (title/details/reviewer ->
prompt/show/timeout_seconds). Guard: approvals_origin_test renders the
card via the hermetic fake hub and pins every origin fact.
Runs: the "hub too old" state now leads with an in-place update button
(same `chain update apply` path as the Diagnose page), the Diagnose
deeplink demoted to secondary, with a CLI-absent fallback. Guard: two
new RunsLoadErrorView widget tests.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Doctor: when the system AI uses an Ollama endpoint that no declared
host service covers (host:port match, /v1 suffix stripped), the
services panel says so in one sentence with a one-click 'declare as
host service' via the new DeclareService RPC — and states honestly
that it takes effect after a daemon restart (the restart button sits
on the same page). Pure suggestOllamaServiceEndpoint pins every
branch.
Shell: one slim, dismissible banner after connecting when the
release manifest offers a newer hub version; dismissal is persisted
per version so each release hints exactly once (pure
shouldShowUpdateHint + a widget test through the fake hub).
Deliberately manifest-based — Studio and hub versions are
independent counters, so a direct comparison would be wrong;
unreleased dev skew stays with the per-page classified states.
The probe stays inert under the test probe override: its timeout
timer leaked into hub_banner_test (the hermeticity class again).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The detail sheet always answers 'who maintains this?': one
selectable line per maintainer from the store index's new
maintainers list, or an honest 'not specified' when the index
names nobody (StoreMaintainersSection, public for the widget
tests). The install trust gate carries the same fact when
present and stays terse otherwise. DE+EN; dialog-harness proof
captured with the maintainer row.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Even with the honest install badge the hub error stays reachable
(stale store snapshot, race with a store refresh, older hub). The
friendly-error mapper now gives it its own headline plus a hint
naming the three acquisition paths — local module install, adding
the providing store, configuring the MCP/n8n integration — in EN
and DE, with the verbatim hub message kept copyable. Matcher unit
tests EN+DE guard the classification.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The doc-verifier pass over the new trust/exposure surfaces came back
PASS with five improvements, all applied:
- the store policy notice gains a 'Learn more' into the security doc
(the notice named security.require_signatures but not where it
lives)
- 'blocked' disables the trust gate's install button — an active
button contradicted the 'install would be refused' statement right
above it (guard test added)
- the unknown-exposure tooltip now says what the operator can do
(check where the name resolves)
- dead l10n key verifPillUnverified removed (unverified is the
page-level notice, never a card pill)
- stale header comment in install_verification.dart corrected
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The trust-gate dialog replaces its generic 'no per-entry status yet
(alpha)' note with the hub's classified verification statement —
pinned store key / trusted publishers (green), installs without
signature checking (amber), install would be refused (red), bridge
entry (neutral) — via one shared describeInstallVerification mapping.
Against a pre-0.23 hub the field is empty and the old honest wording
stays (pinned by test).
Information architecture: policy-off is a GLOBAL fact, so it appears
as ONE ChainInlineHelp notice above the store grid instead of a
warning pill on every card (card noise); only 'blocked' — a genuine
per-source anomaly — earns a card pill. Doctor's host services show
the hub-classified network reach per endpoint (local only / private
network / publicly reachable with a protect-it hint / reach unknown).
Verified end-to-end against the live dev hub (guide harness): the
wire field arrives, the store page shows exactly one policy notice
and quiet cards; trust-gate variants captured via the dialog
harness. Suite 123 green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Federation and Runs help buttons opened the architecture doc:
federation.md/runs.md existed as assets but had no _DocEntry, so
showFaiDoc resolved the unknown slug to _kDocs.first. Register both
(onWelcome: false, so they don't clutter the newcomer grid but are
reachable), split the Welcome grid onto the curated subset, and make
the unknown-slug fallback assert in debug instead of silently opening
the wrong topic.
Guard (no-bugfix-without-a-guard): doc_help_wiring_test.dart scans
lib/ for every showFaiDoc('slug') call and asserts each has a
registered entry AND both assets/docs/<slug>[_de].md files. Exposes
kKnownDocSlugs for the test.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The switcher listed sealed areas by name ('lbs', 'stromnetz') on
any glance or screenshot — but the names themselves often carry
client/mandate identity (usertest security finding). The sealed
section now renders one aggregated row ('2 sealed areas') with a
deliberate 'Show names' reveal per menu opening; selection still
pops the regular s:<slug> value. Settings -> Security gains 'list
sealed areas with their names right away' (WorkspacePrefs,
SidebarPrefs pattern, default off).
The aggregate row wraps to two lines — popup menus cap their
width and action texts must never be truncated (the first cut
showed '1 abgeschotte…' in the proof shot). Guard: switcher tests
cover aggregated-until-reveal and the Settings toggle; the old
direct-listing test now asserts the reveal contract. DE+EN.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The widget suites used to talk to whatever listens on the real
endpoint — results depended on the operator's machine (a running
hub fed real data into a11y/responsive runs and its gRPC channel
timers caused the historic flake). Hardening round:
- HubService.instance is now injectable (debugSetInstance);
FakeHubService (test/support/fake_hub.dart) answers every member
the pages touch with healthy-empty defaults and scripts per-RPC
failures (UNIMPLEMENTED / UNAVAILABLE / detached gate) through a
GrpcError-shaped fake. Unimplemented members are recorded and
fail the sweep with the exact list.
- state_matrix_test.dart pins the app-wide invariants for every
sidebar page x hub condition: healthy => no unreachable claims
and no raw error text; hub gone => honest unreachable states;
UNIMPLEMENTED => never 'not reachable' while the sidebar shows
connected; detached gate => plain-language feature-off state.
- a11y + responsive sweeps now inject the fake (hermetic); the
6-minute idle-timer drain workaround is gone with the cause.
Real bugs the new sweep caught immediately:
- every data page (store, doctor, audit, approvals, federation)
folded ANY load failure into 'hub not reachable' — the runs-page
bug class; they now share HubLoadErrorView, which classifies
into unreachable / needs-newer-hub / load-failed-with-copyable-
detail (new generic DE+EN strings)
- the approvals page's hidden tab had no future listener: a load
failure there surfaced as an uncaught async error
- the audit status bar rendered the raw gRPC error wall verbatim;
it now shows the classified friendly headline (still selectable)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Doctor findings used to be dead-end statements — 'approvals
waiting for review' left the operator to find the approvals inbox
on their own. Every finding with a dedicated surface is now one
tap away from it:
- summary tiles: modules -> store, approvals -> approvals inbox,
audit chain -> audit log (chevron affordance, tooltip + semantics
button; the services tile stays plain — no dedicated page)
- modules/approvals panel rows link the same way
- the event-log headline opens the audit page next to the
existing verify button
- host-services empty state gains a 'view the configuration'
button opening the in-Studio config viewer the hint refers to
- the update banner's release-notes URL is now an underlined,
clickable link instead of dead text
Tiles and the panel are public callback-driven widgets so the
widget tests pump them without a live hub. New DE+EN link labels.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The runs monitor folded every load failure into 'hub not reachable',
contradicting the sidebar's green connected dot whenever the hub
answered but the RPC failed — most visibly against a pre-0.22 hub
whose version predates the ListInvocations RPC (UNIMPLEMENTED).
Classify the failure instead (top-level, unit-tested):
- UNIMPLEMENTED -> 'this view needs a newer hub version' with a
doctor-page link (the update banner lives there)
- FAILED_PRECONDITION from the detached gate -> the regular
feature-off empty state with the guide button
- UNAVAILABLE / DEADLINE_EXCEEDED / socket-level failures -> the
honest 'hub not reachable' state (unchanged)
- everything else -> a load-failed state with the friendly error
and a copyable detail box
The error view is a public callback-driven widget so the tests pump
each variant without a live hub. New DE+EN strings for the too-old
and load-failed states; grpcCodeOf/grpcMessageOf exposed from the
friendly-error mapper instead of duplicating the duck-typing.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The menu so far only exported the current view (type + search
filter over the page 100-event window). A second action now fetches
the complete event history of the active project scope in one
EventLog call (the RPC has no cursor and no server-side cap) and
writes it as JSONL. Serialisation extracted to a top-level function
with unit tests; a stale comment advertising the never-shipped
"chain audit export" command now names "chain admin events --json".
Studio 0.73.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Store hero: 'TODAY' badge only for an operator-accepted story; the
rotating compiled-in fallback deck now says 'FEATURED' (no false
freshness claim). Policy as a top-level function with unit tests.
- Audit filter chips: standard label typography instead of mono —
mono stays reserved for paths and identifiers.
- DE chain wording: 'Hash-Kette geprüft' as the one confirmation term
(audit header now matches the doctor pill); 'intakt' stays the
state headline. EN was already consistent.
- Workspace switcher: contrast bump for the sealed-area 'stopped'
label.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Three doctor-page findings from the usertest panel:
- Module tile no longer counts the hub's built-in 'system'
pseudo-module — a fresh hub shows 0 modules, matching the
welcome checklist's definition of an install. Counting is a
top-level function with unit tests.
- When the audit DB lives in an OS-cleanable temp directory
(/var/folders, /tmp, Windows Temp), the daemon-files panel
says so instead of presenting the state as healthy. The
classifier is a top-level function with unit tests.
- The daemon card states who-talks-to-whom-how in one line:
endpoint, transport security (TLS / unencrypted-local /
unencrypted), and whether a bearer token is attached (length
only) — the auditor's baseline the green dot cannot answer.
Also syncs pubspec.yaml (0.70.0 -> 0.72.0) with kStudioVersion,
which had drifted to 0.71.0 while pubspec stayed behind.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
'document' rendered as a raw lowercase English token next to
localized neighbours; unknown categories at least capitalize.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- 'Mit Endpunkt verbinden' — no Endpoint/Endpunkt mix
- audit-chain lead term is 'Hash-Kette' everywhere (doctor pill);
chain detail says 'Verkettung lückenlos geprüft' instead of the
raw field name prev_event_sha256
- welcome checklist line says who refreshes what
- setup privacy note explains the local model instead of ending in
a bare model tag
- default project renders localized ('Allgemein') in the switcher;
sealed-area status pills explain run state on hover
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Text widgets render markdown backticks verbatim (usertest: reads
as typos / raw dev output) — stripped across both catalogs; code
terms stay inline in plain type. 'Zeig dem Hub' / 'Nimm das CLI'
now use the formal address; the guard test learns both stems.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- audit type filter: 'Alle'/'All' capitalized like every other label
- settings -> setup wizard: close Settings first (one modal layer),
stronger wizard scrim
- try-out setup profile discloses the upgrade path to a regulated
profile
- store maturity pills explain themselves on hover (experimental/
published/planned)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The empty state unconditionally claimed background runs were
switched off, even on hubs where the operator had enabled them.
The hub now reports the flag on the list RPC (detached_enabled);
the hint picks the truthful variant.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- search field over flow/step/module/error/detail/project/id backs
the list and the export ('current view' semantics); match logic
is a top-level function with unit tests
- export writes one JSON object per line via the save dialog; the
CLI stays the canonical WORM-grade export
- the bare trash icon on the audit toolbar read as 'delete
evidence' (security-auditor finding) — the dev-only reset now
sits in a labeled overflow menu next to the export action
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- 'Fähigkeiten' is the German lead term everywhere (welcome step 2,
integrations panel, federation) — English jargon only as a
parenthesized technical term on first mention
- 'Enrollment-Token' -> 'Registrierungs-Token', bootstrap label in
plain words, CA spelled out, enrollment hint now formal address
- formality guard also rejects reader-addressed imperatives
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- approvals inbox hint explains human approval in plain words
instead of citing system.approval@^0
- doctor summary counts use ICU plurals (1 module / n modules)
- audit chain pill says 'Integrity chain verified' instead of 'v1'
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
One-click installs showed no trust signal at all (top security
finding of the usertest panel). Every install path — store card,
detail sheet, and the flow list's quick fix — now routes through
one confirmation dialog showing what the hub actually knows
before download: origin store, version, license, maturity, and
required services/capabilities, plus the sandbox model and an
honest note that per-entry signature status is not in the store
index yet (verification happens hub-side at install). Widget
tests cover content and confirm/cancel semantics.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Procurement personas found no vendor, version, license, or
support information anywhere in the app (a hard checklist fail
for regulated buyers). Settings gains an About category:
product name, Studio + running-hub version, vendor Flemming.AI,
author, Apache 2.0 license, contact address, and the docs URL —
every value selectable and one-click copyable. Studio version
constant moved to data/about_info.dart so sidebar tag and About
can never drift. Bumps Studio to 0.71.0.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The icon-only rail forced first-time users to guess (usertest:
Senior, a11y, UX personas). Three changes:
- Nav tooltips appear instantly and carry the page shortcut
(Cmd+1..9, Ctrl on non-mac — Ctrl activators added); expanded
labels show the same hint. Explicit button semantics for
screen readers on every destination.
- A visible 'Search & commands' row above the footer opens the
existing Cmd+K palette, which nothing in the UI advertised.
- Settings -> Appearance gains 'Keep the navigation expanded':
pins the rail with permanent labels (persisted preference).
Footer strip and pillar toggle made overflow-safe for the
animating rail; responsive test scrolls the by-design scrollable
destinations list.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Hub/Module/Flow cards explained the basics in the very
vocabulary they were supposed to introduce (Rust binary, WASM,
YAML, hash-chained). Each card now leads with a plain-language
explanation; the technical wording moved behind a per-card
'for the technically curious' toggle. DE and EN.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Stefan's live findings, all four addressed at the root:
- 'In 3 Fragen loslegen' read like ad copy → the entry is now plainly
'Einrichtung starten' / 'Start setup'.
- The setup button sat permanently on the Welcome page of a running
app ('setup after the app runs is backwards' — reported twice). A
fresh install now starts INSIDE the setup: SetupGateScreen hosts
the wizard embedded as the page (new embedded/onFinished modes on
GuidedSetupDialog), with an explicit 'Später einrichten' skip.
Welcome loses the setup button entirely and stays a calm intro.
- Re-running the setup later lives in Settings → General ('Run setup
again…'), the single post-first-run home.
- 'You must grant access first and only then see what will be done':
the preview used to spawn the chain CLI, whose first run could pop
the macOS permission prompt BEFORE the plan was ever shown. The
preview now calls the new PlanSetup RPC over the live hub
connection (no subprocess, nothing granted); the CLI remains only
a fallback when no hub is reachable — and applying stays the
explicit, separate step.
Widget tests: gate hosts the wizard + skip/cancel leave it; CLI-path
tests drive the fallback through the new hub-preview test seam.
Suite 76 green, analyze clean.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Review follow-ups on the auth-status work:
- Both daemon-start paths classified an auth-rejected hub as "daemon
dead" via healthy() and showed a start-failure dialog while the
shell banner above correctly blamed the token. They now share
daemonAnswers(): only an unreachable probe counts as down.
- An auth-rejected poll now re-reads ~/.chain/hub-auth-token and
reconnects when the file changed, so a token fixed outside Studio
(CLI, editor) heals the connection without a restart — previously
the client kept the stale in-memory token forever and the banner's
own advice could not work.
- An endpoint switch resets the failure streak, so a stale in-flight
probe can no longer let the unreachable banner blame the new
endpoint for the old one's misses.
- The auth-policy panel re-queries when the hub token is saved or
cleared in the panel above (reloadTick), instead of keeping a
stale admin-denied hint; it also renders the hub's new
reload_required flag as a pending-reload warning (DE+EN).
- today-pipeline.md still documented ~/.fai/today after the rename;
the FAB theme comment now states the both-themes intent.
flutter analyze clean; 71 tests green including four new ones.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The sustained-failure banner treated every failed health poll as
'can't reach the hub'. With token auth active, a wrong or rotated
token gets UNAUTHENTICATED from a perfectly reachable hub — the
old wording sent the operator to fix the endpoint. The shell now
uses the SDK's probe() and, on auth rejection, switches the banner
to 'rejected the sign-in — check the access token' (key-off icon,
DE+EN). Two widget tests pin the wording per failure kind and the
banner clearing once the probe turns serving.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Accessibility/responsive audit pass with two new permanent test
gates (test/a11y_test.dart: WCAG text contrast + labeled tap
targets on every page in both themes; test/responsive_test.dart:
no layout overflow at 800/960/1280/1920 px). Findings fixed:
- Light theme primary/tertiary sky-500 → sky-700: white text on
the lighter accent only reached 2.8:1 (welcome CTA, active
sidebar label); sky-700 clears WCAG AA at ~5.9:1. Dark theme
unchanged (already compliant). FABs now follow the same accent
instead of Material 3's washed-out tonal default.
- Audit page: filter chips collapse into a checkmark popup menu
below 900 px window width (app bar overflowed); the live-status
bar's left text is now Expanded with ellipsis so the row can
shrink, and the disconnected state's copyable error gets the
full remaining width.
- German strings now use formal address consistently (~20 strings
still used du-forms next to Sie-forms on welcome/setup), the
audit event-type chip "Step" is "Schritt", and the doctor
page's event count pluralises correctly in both languages.
flutter analyze clean, 64 tests green. Screenshot pass light+dark
via the guide-shots harness (verified parity, no overflows).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Settings → Security now shows the hub's effective auth policy via the
new read-only AuthStatus RPC: active token validator (static / jwt-rs256
with issuer, audience, JWKS source), anonymous-access warning, per-token
cards with scope grants, env-var presence and rate limits, plus a
localized admin-denied story for non-admin tokens. Live-reloads on
endpoint change.
Also fixes a batch of fai→chain rename leftovers this panel's
verification uncovered: hub_auth_token.dart and registry_token.dart
read/wrote ~/.fai/ while the hub reads ~/.chain/ (stored registry
tokens never reached the hub), today_story_loader + tools/today used
~/.fai/today, chain_log legacy ~/.fai/logs migration removed per the
no-legacy-recognisers decision, and UI strings still advertised the
retired .fai bundle extension.
Includes 5 widget tests for the panel, an integration-test screenshot
harness (auth_policy_shots_test.dart, guide-shots style), and DE+EN
l10n. flutter analyze clean, 58 tests green.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Field test of the setup wizard surfaced three trust breaks in one run:
an unexplained macOS Documents permission prompt, a perceived crash,
and an error message whose copy button could not be reached.
Root causes and fixes:
- chain init failures were shown as a SnackBar, which lands BEHIND the
wizard's modal barrier: dimmed, clipped, copy unreachable — and the
click aimed at it hit the barrier, dismissing the whole wizard with
all answers (the perceived crash). Errors now open a modal dialog
ABOVE the wizard via showChainErrorDialog with a copyable detail
block, and the wizard is no longer barrier-dismissible.
- When the resolved chain binary is older than Studio and rejects
--plan-json, the wizard now explains the version skew in plain
language (binary path + update path) instead of leaking a raw clap
usage error. A missing binary gets its own localized story.
- Step 3 announces which chain binary the preview will execute; when
that binary physically lives (symlinks resolved) in a TCC-protected
folder, the wizard pre-explains the macOS folder prompt.
Supporting changes: FriendlyError passes through friendlyError()
unchanged so call sites can ship precise localized stories through the
shared presentation; SystemActions gains resolvedChainBinary() plus
run/resolve test seams; ChainErrorBox hugs its content instead of
filling an unbounded dialog; the wizard's answers file is written
synchronously (the async dart:io variants never complete under the
widget-test fake-async zone).
Verified: flutter analyze clean, 53 tests green (6 new wizard error-
path tests incl. clipboard round-trip), plus a live GUI walk on macOS
in dark + light with a stale binary (skew dialog, copy verified via
clipboard) and with the real binary (TCC pre-explanation with the
resolved path, full plan preview).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The regulated setup path sends the operator to the stores dialog to
pin a publisher key — but the field was labelled 'Angepinnter
Public-Key — PEM (optional)' with du-form developer prose (PEM,
vendor key) at exactly the trust-critical moment. Field now reads
'Signatur-Schlüssel anheften (PEM, optional)' with a plain-language
Sie-form explanation of what pinning does; the dialog intro and the
onboarding checklist follow (MCP jargon explained in the sentence,
developer-only follow-up cards labelled as such).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- Regulated path finishes without a terminal: the signed-source
state offers 'Add a signed source…' (stores dialog with pin-a-key)
plus the per-module install buttons and a plain-language hint why
pinning the publisher's key matters — instead of a hint with no
affordance.
- Apply warnings (e.g. the empty-trusted-publishers caveat) surface
selectable in the done state instead of being swallowed.
- Truthful preview: new lines state which machine is being set up
(server/container targets configure THIS machine), that regulated
profiles always get the hash-chained audit log (even with WORM
off), and that the curated reading list is stored with the setup
record.
- Language pass: onboarding checklist in Sie-form + 'System-KI'
(was du-form + 'System-AI'), 'Audit-Sperre' jargon replaced,
answers file moved to a private per-dialog temp dir.
- Screenshot harness: GUIDE_SHOTS_THEME=light for light-parity
proof runs.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The wizard's first step now offers 'or just describe what you want
to do': the goal goes to the configured system AI, which maps it
onto the menu answers (validated against strict enum whitelists —
a hallucinated value can never reach the engine). The suggestion
comes back as an editable plain-language reflection ('this is how I
read your task') the operator can adjust step-by-step or take to
the same preview/apply the menu path uses. Trust rules per
guided-setup.md: suggestion only (never auto-apply), a privacy line
states whether the description is processed locally or sent to a
provider, and without a configured system AI the section explains
that the menu always works — no dead end.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Post-apply the wizard now renders real Studio actions instead of CLI
text: a start-hub button that polls until the daemon answers,
per-module install buttons (capability-name install via the hub's
store index) with done/progress states, and an open-the-starter-flow
button that navigates to the Flows page. Regulated plans explain in
plain language that modules come from a signed source; the preview
offers 'allow installing from the public store' as one deliberate,
reversible switch that re-assembles the plan (allow_unsigned_modules).
Fresh installs (no config, no setup-plan.yaml) auto-open the wizard
once per run — the wizard IS the onboarding — and it steps back once
a setup exists. The welcome CTA is framed honestly ('get started in
3 questions'), and after the wizard closes the onboarding checklist
remounts, re-probes, and says what the assistant already covered
(profile line from setup-plan.yaml) instead of acting as a second,
disconnected onboarding surface.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Reworks the Setup-Assistent toward the zero-learning-curve bar
(docs/architecture/guided-setup.md, phase 1.1):
- Every scenario/intent/target choice is now a localized option CARD
with a one-line plain-language explanation of what it configures
(DE+EN, Sie-form) — replacing the bare dropdowns whose labels were
English enum humanizations ('Regulated Production', 'This Laptop').
- Three explained steps with a 'Schritt n von 3' progress line
(stakes → task → environment); the two adaptive toggles move to the
last step in plain language (no 'air-gapped' jargon).
- The review step renders a localized PLAIN-LANGUAGE summary built
from 'chain init --answers --plan-json' (the structured SetupPlan) —
'Ch∆In richtet einen regulierten Betrieb ein: signierte Module
verlangt · … · geändert wird nur ~/.chain/config.yaml' — instead of
echoing the CLI's English prose. Warns when an existing config will
be overwritten. After apply: a plain 'Fertig' + next steps.
flutter analyze clean; widget tests for the step flow + German option
labels. Remaining per plan: clickable follow-up actions, signature
dead-end fix, placement/auto-open, and the LLM free-text path.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The workspace switcher now lists the operator's sealed areas (read from
~/.chain/sealed/ manifests, the same source the CLI uses) below the
shared projects, each with a lock icon and a running/stopped status.
Selecting one is a real connection switch: Studio reconnects its hub
client to the area's own port with a full state reload — one window,
one truth. A stopped area is started first (chain project start) with a
visible notice; a failure surfaces as a copyable error and rolls back to
the shared hub.
While in a sealed area an identity bar under the AppBar is painted in
the area's accent colour and names it, with a one-click Leave back to
the shared hub. The area colour is marking, not theming — Studio's blue
stays the app accent. Selecting a shared project from inside an area
switches the connection back first. The sealed connection is never
persisted across restarts.
New: SealedAreaService (manifest + PID discovery), Workspace sealed
switch logic, ChainSealedIdentityBar, SystemActions.chainProjectStart.
l10n DE+EN. flutter analyze clean; 33 tests green (switcher lists sealed
with lock+status, pill shows active area, identity bar renders in the
area colour). Runtime plumbing (discovery, start, endpoint, reach)
verified headlessly against real sealed instances under a redirected
HOME; the identity-bar screenshot is deferred (display click-automation
failed after sleep on the shared desktop — an environment issue, not a
code gap; the visible components are widget-tested).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
New Runs sidebar destination listing detached invocations (detach:true)
with phase, current step, project and a Cancel button while
pending/running. Workspace-scoped like Audit/Approvals, polls every 2s.
Detached runs are opt-in (detached.enabled) — the empty state explains
how to enable them. Inline help doc DE+EN. DetachedRun model +
listDetachedRuns/cancelDetachedRun in HubService, backed by the SDK's
listInvocations()/cancelInvocation(). flutter analyze clean; 29 tests
green (sidebar Y-stability updated for the new destination, model
mapping unit-tested).
Screenshot verification (light+dark) deferred — shared desktop in use.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
Multi-project stage 1 against the shared hub (platform design
docs/architecture/projects.md, § Studio):
- ChainWorkspaceSwitcher in the Audit + Approvals AppBars: lists the
registry (colour dot per project, shield for protected, honesty
tooltip), 'All projects' stays reachable — a filter, not a jail.
Selection is persisted and shared via the Workspace notifier.
- Audit page: list query AND live stream re-scoped hub-side on switch.
- Approvals page: pending + history scoped; the sidebar badge counts
the active workspace's pending approvals.
- Flow runs are stamped with the active workspace; a flow file
carrying its own project: keeps it (file wins, CLI semantics).
- Data layer: listProjects/ProjectRef; project fields on AuditEvent,
PendingApproval(+Record), SavedFlow; project params through
HubService. l10n DE+EN. Widget tests for the switcher contract.
Visual verification (light+dark screenshots) still pending — the
shared desktop was in active use; code paths are covered by
flutter test (26 green).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- approvals: empty/legacy hub prompts render the localized fallback;
approving without show: data asks for conscious confirmation first
- chain_log: write to ~/.chain/logs/studio-errors.log (was .fai),
one-time best-effort migration of the legacy file + rotation sibling
- l10n: 'manipulationssicher' -> 'manipulationserkennend', neutral
WORM-1 blurb, doctor pill 'Integritätskette v1', federation hint
says the CA authenticates the first connect (DE+EN)
- theme: muted text token now >=4.5:1 on canvas, cards and elevated
dark surfaces (was 3.7:1 on cards)
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The grouped store showed the hub's English category labels verbatim
(Documents, Data & Formats) even in German. Map the canonical slug to
DE/EN via l10n (storeCat*), and localize the Modules/Studio segment
(storeSegment*). Falls back to the hub label for an unknown slug.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The welcome hero subtitle described Ch∆In as 'AI-assisted document
processing' / 'KI-gestützte Dokumentenverarbeitung' — too narrow. The
canonical product line is 'AI-assisted data processing' (flows also
handle streams and general data, not only documents). Fixed in both
locales (arb + generated app_localizations).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
StoreItem gains source (mapped from StoreEntry.source); the store grid
shows a 'from <store>' label for operator-added stores (bundled seed
unlabelled). Foundation for grouping by store. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
friendlyError now pattern-matches module-download failures ('download
failed: ...') and renders a clear, copyable headline + the URL/status
detail, instead of letting the gRPC-Unavailable default show the generic
'hub not reachable' banner. EN+DE l10n.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
A Welcome 'Setup assistant' button opens a wizard that collects
scenario / intent / target (+ approval & data-local toggles), then calls
`chain init --answers` to preview the assembled plan and `--apply --force`
to write the config — reusing the Rust deterministic engine, no logic
duplicated. New SystemActions.chainInit; copyable errors via
showFaiProcessError; EN+DE l10n. analyze clean; smoke test + existing
welcome/sidebar tests pass.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The module-store manager's 'Add a store' form gains an optional PEM
public-key field; when set it pins that publisher key to the store
(per-store signing trust). Localized DE/EN.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The approval card only rendered the payload section when a preview
existed, so a step with no 'show:' showed nothing and the reviewer
could not tell why. Now always show the section: a present payload
scrolls inside a height-capped, copyable box; an absent one shows an
explanatory hint (the flow's approval step chooses what to surface via
its 'show:' field). Relabel 'data to be released' -> 'data to review'
(the payload is review context, accurate to its source).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
- store: repair the filter dialog crash (a Spacer lived directly in
AlertDialog.actions, which is an OverflowBar, not a Flex — it threw
and rendered a broken dialog). Buttons now sit in a Row.
- store: promote the module-store manager from a bare icon to a
labelled 'Add store' button, and fully localize the dialog (DE/EN).
- store: add a curated 'Suggested stores' shelf with one-click
add/remove (first entry: Recl∆Im). Each suggestion is probed for
reachability and shows 'not available yet' until its index is
published, instead of failing only on click. Fail-open on network
errors so a transient hiccup never hides a real store.
- sidebar: the channel pill is now a one-click channel switcher
(menu with per-channel running state + active check; switching
writes ~/.chain/current-channel, restarts the daemon, and Studio
repoints to the new channel).
- approvals: lead the card with the human prompt ('what am I
releasing?') and demote the flow/step id to a metadata line; clear
fallback when the step left the prompt empty.
- welcome: tidy the docs grid into equal-height paired rows with a
full-width trailing card for the odd one out.
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
The Studio design system, widgets and helpers carried a Fai* / fai_
prefix (FaiSpace, FaiColors, FaiTheme, FaiLog, 17 fai_*.dart files, the
faiBinary* l10n keys). Studio is the Ch∆In product, so rename them to
Chain* / chain_ — carefully preserving English fail/failure/failed.
Also fix stale references: the 'fai' binary in l10n strings -> 'chain',
FAI_* env vars (FAI_BIN/DATA_DIR/MODULES_DIR/TODAY/BOOTSTRAP_TOKEN) ->
CHAIN_*, fai_platform -> fai_chain, fai_hub -> chain_hub. Vendor
security-hook tooling (FAI_BANNED_TERMS_FILE) + the .fai bundle ext left.
flutter analyze + test: clean (20 passed).
Signed-off-by: flemming-it <stefan.a.flemming@googlemail.com>
